Eco-Solv Printable Silver Polyester

[mpn]

I'm looking for a silver polyester adhesive backed material we can print with our Roland. This is for equipment labels that get a sharpie marker ID # and then covered with a clear laminate for protection by the customer. It's for small runs that I need to keep in house. Any suggestions would be appreciated.

 

[petepaz]

r-tape makes some products you can use but they are vinyl coated. in my experience i could never get the roland ecosol ink to stick to polyester materials (chrome, brushed or matte silver/gold)

 

[mpn]

Thanks Petepaz that's what I was concerned with.

 

[SignMeUpGraphics]

Roland EcoSol MAX adheres very well to http://www.rtape.com/vinylefx/outdoor-durable-smooth-silver

The only issue I have is contour cutting close to printed areas.
The spec sheet says no cuts within 5mm, and I have to agree or it will start to peel (even after 6 weeks dry time before cutting).
Lamination didn't help either.

 

[chrisphilipps]

We have a product without adhesive like this. All you would have to do is put a double faced adhesive on the back of it. It works with Mutohs eco solvent inks so it should work with Rolands.

 

[rjssigns]

We use R-Tape brand in silver and holographic for a clients product. No complaints so far and it's been 2 years.