Graphtec Fc 7000-75

[printimage]

When i send something to cut these numbers and letters cut on the material. Any ideas on the problem?

 

[GaSouthpaw]

Does it cut the job, or just that? Looks like your cutting program is sending a job number or something. Check it for something that's checked that shouldn't be.

 

[Solventinkjet]

Graphtec made their own communication language called GP-GL and it works with the software that comes with the Graphtec. If you are using any software that isn't Graphtec branded , like Flexi, you have to go into the cutter's menus and change the communication language to HP-GL which is a more universal language.

 

[BIG EASY DOES IT]

Looks like a language issue. Read on resetting to default and then setting HP-GL

 

[printimage]

Looks like a language issue. Read on resetting to default and then setting HP-GL

Thanks It work

 

[beachnsled]

I thought I would post here, instead of creating a new thread for the same cutter.

We have this error come up often - only for certain graphics. We think there is an issue with the actual image - any ideas:

"object of incorrect type to support this operation"

Thanks!
Beach

 

[TopFliteGraphics]

Just had this same problem. Spent hours trying to figure out wtf happened. Even reloaded Flexi thinking it was a software issue. Next time I will come here first LOL