Ink for UV Teckwin Teckstorm XL

[PrintGuru]

We have a UV Teckwin Teckstorm XL with XAAR 760 printheads. Been using One Solution ink for it but looking for a change because the supplier has become unreliable. Any suggestions on what kind of ink would work with it?

Cheers

 

[wunder]

The Teckwin Europe (Germany) change all the Machines to the FUJI-SERICOL INKs....the best Choice for...All New Machines from Teckwin Swopped to Fuji ink... this is the info from an Fujitechnican

regards
wunder

 

[PrintGuru]

Fuji Inks

Thank you for your reply wunder. We operate in SouthEast Europe. Is there a reliable supplier/contact that covers this area for Fuji Inks?

Appreciate you time.
Cheers
Sam

 

[wunder]

http://www.euromedia.eu.com/eshop/index.php/gPath/4000_4150/XTCsid/2b777480ad98a4d95bb6f6e75cab9342

this is in Germany......you can directly quest eurmodedia Help Line

Second usabel 3rd Party Inks from http://Blue-Mall.com Mr. Frank Barth can be directly contacted. Good Choice for your thinks !!!

regards
wunder

 

[diverso]

need help for UV Teckwin Teckstorm XL

Hello to everyone!

I'm writing you from Bulgaria, we bought a second hand printer UV Teckwin Teckstorm XL, it was working when we get it, now we install it and we have problem with the I/O board (is in red on the software) the pomps of the inks don't work all and the second ink tanks are empty, we changed the I/O Board but there is no change if someone have any idea why we have this problems please help us.

 

[wunder]

check the powerline to the IO-Board become 24V/36V (is present)

 

[diverso]

check the powerline to the IO-Board become 24V/36V (is present)

Hi! Thank you vary much for your answer, we have installed the printer and now we print, I want to ask you does anyone know how to change the print head voltage, because we have this problem with the red and the white they start ok and after 10sm- 20 sm we have some bad nozzles, and when we start the printer at the beginning we don't have such problem when the ink is not so well worm. At the nozzle test, the head is in perfect condition.

Thanks again!