laminant static cling decals?

[ambrartz]

You think it nessesary to laminant static cling decals.. its a job for a car lot.. so they will be outside.??

 

[Bill Modzel]

No, lf they're white static there's no need to. I'm assuming that they're solvent printed.

 

[natedawg9640]

i'd advise against it. the lamination will shrink at a faster rate that the cling and since there is no adhesive to hold the cling down, it'll flag the edges and make it fall off.

 

[petepaz]

i'd advise against it. the lamination will shrink at a faster rate that the cling and since there is no adhesive to hold the cling down, it'll flag the edges and make it fall off.

+1
and for what you are using it for no lam is needed

 

[NolaSignGuy]

i'd advise against it. the lamination will shrink at a faster rate that the cling and since there is no adhesive to hold the cling down, it'll flag the edges and make it fall off.

THIS.

I would advise against it totally and ask if maybe they wanted it reverse printed on clear, then backed in white or even die cut after backing it to keep it away from outdoor elements.