Laminator Help

[TMPSigns]

My royal sovereign laminator is not moving! Nobody will help me fix this! Any help is appreciated.

 

[TumwaterTom]

 

[TMPSigns]

Only bout a million times.

 

[tbullo]

You prob. already checked, but sometimes i bump that E stop on the back of mine.

 

[chrisphilipps]

What model Royal Sovereign?

 

[TMPSigns]

What model Royal Sovereign?

Sigmont 55H

 

[TMPSigns]

You prob. already checked, but sometimes i bump that E stop on the back of mine.

Yea plus it beeps loudly.

 

[chrisphilipps]

More than likely it is what Royal Sovereign called the Frequency Generator. It is a common fail part on the Sigmonts. It should be located in the area that I have circled in the attached image.

 

[TMPSigns]

More than likely it is what Royal Sovereign called the Frequency Generator. It is a common fail part on the Sigmonts. It should be located in the area that I have circled in the attached image. View attachment 174911

This would cause the top to stop spinning?

 

[Geneva Olson]

your emergency stop button is depressed. pull up on it. the beeping will stop and you will be back in business.

 

[TMPSigns]

your emergency stop button is depressed. pull up on it. the beeping will stop and you will be back in business.

The button is not pressed and it is not beeping. Believe me this was the first thing I checked. I have been in the sign industry for 20 plus years.

 

[Geneva Olson]

The button is not pressed and it is not beeping. Believe me this was the first thing I checked. I have been in the sign industry for 20 plus years.

oh damn. i misread what you typed. I actually got a perfectly good royal sovereign laminator for free because the stop button was pushed and someone didn't know how to stop the beeping.

 

[chrisphilipps]

The frequency changer is what actually runs the motor that moves the rollers. When it fails the unit will not spin at all.