-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Laminator Help
- Thread starter TMPSigns
- Start date
TumwaterTom
New Member
chrisphilipps
Merchant Member
What model Royal Sovereign?
TMPSigns
New Member
Sigmont 55H
TMPSigns
New Member
Yea plus it beeps loudly.
chrisphilipps
Merchant Member
More than likely it is what Royal Sovereign called the Frequency Generator. It is a common fail part on the Sigmonts. It should be located in the area that I have circled in the attached image.
TMPSigns
New Member
This would cause the top to stop spinning?
Geneva Olson
Expert Storyteller
your emergency stop button is depressed. pull up on it. the beeping will stop and you will be back in business.
TMPSigns
New Member
The button is not pressed and it is not beeping. Believe me this was the first thing I checked. I have been in the sign industry for 20 plus years.
Geneva Olson
Expert Storyteller
oh damn. i misread what you typed. I actually got a perfectly good royal sovereign laminator for free because the stop button was pushed and someone didn't know how to stop the beeping.
chrisphilipps
Merchant Member
The frequency changer is what actually runs the motor that moves the rollers. When it fails the unit will not spin at all.
Joseph44708
I Drink And I Know Things
Check that the front table plate is in correctly, if not it won't run. There is a small safety switch that is activated when table is inserted correctly.