PurplePanther
New Member
Any final tips on installing graphics to a metal surface 20ft wide x 10ft tall?
We are using 3MIJ180C-10 With 8518 Lamination.
I made vinyl panels that are approx. 40'' wide x 10ft tall.
I have about 1/2'' overlap built in.
Not too much in the way of lining up art graphics from panel to panel.
Lots of "white" vinyl space.
The metal surface is a cooler with some unevenness but pretty smooth.
No condensation, etc issues are to be expected.
Just wet apply and go to town??
TIA!!
We are using 3MIJ180C-10 With 8518 Lamination.
I made vinyl panels that are approx. 40'' wide x 10ft tall.
I have about 1/2'' overlap built in.
Not too much in the way of lining up art graphics from panel to panel.
Lots of "white" vinyl space.
The metal surface is a cooler with some unevenness but pretty smooth.
No condensation, etc issues are to be expected.
Just wet apply and go to town??
TIA!!