machine to cut wooden letters

[StickerBee]

Cutawl seems the one I need. But I viewed the ShaperTool its very impressive. I like the ShaperTool better but with a hefty price tag.

 

[Christian @ 2CT Media]

Cutawl seems the one I need. But I viewed the ShaperTool its very impressive. I like the ShaperTool better but with a hefty price tag.

The shaper origin would give you exact letters everytime and allow you to Vcarve and etc.

 

[Gino]

Here's what we've been using, since I can remember.

 

[johnwon]

For something like this I would use my AXYZ CNC Router. MDF is messy to cut and you'll want to ensure that you have good dust collection. Most CNC routers would cut the material, but some may need to make several passes to avoid slowing the bit down too much and burning it up if the spindle isn't strong enough. As far as hold down when cutting large letters, I simply screw the sheet to the MDF router table and the letters are heavy enough that they should not move.

 

[spectrum maine]

Scroll saw, unless you're planning on doing a lot of them. Then, incest in an expensive machine.

NOT FROM A FAMILY MEMBER THOUGH