Roland VG 540 Scan motor error 0020 0020

[Jim Hancock]

Does the drive belt feel reasonably tight?

 

[Jim Hancock]

Can't grease the motor and DON'T grease the belt.

 

[Pawel90]

In my personal opinion belt is loose. Attaching pictures. Also belt looks very dirty.

 

[Jester]

...I'm thinking to put more grease on the rail. ... can I grease a motor or a belt?

Jim is trying focused things to troubleshoot your problem, but I'd be careful about applying grease willy-nilly to things.

From the VG User's Manual:
IMPORTANT
• This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
• Never attempt to oil or lubricate the machine.

 

[Jim Hancock]

Sent you a pdf on how to tighten drive belt. Do in increments at a time until the "hesitation" noise stops and the head carriage seems to stop and reverse direction smoothly.

 

[Pawel90]

Done tiding, nothing change... Time to look at the motor... Il call tomorrow for an engineer to take a look. Thank you, everyone, for help, Especially Jim Hancock!

 

[Pawel90]

Hello Everyone.
At the end, That was a Scan motor foul. Had it replacement and now working fine. The motor got 500 working hours.
Theard can be closed.