Attila Nagy
New Member
It is common in Roland printers the faulty network port on mainboard, But still would not mention motherboard change until making sure, network configured properly.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Roland VP 540 AND VERSAWORKS loosing IP connection and stop printing not connected
- Thread starter Wwonka
- Start date
Roland Certified Tech
New Member
The only way to fix the VP ethernet connectivity is with a new main board. The main board is not available anymore. You can keep heat by the chassis and that will witk. for a while.
Itsacustomised
New Member
Where in Uk? I’m in se london.
could you help switch out a Mainboard from a vp300 and put in a vp540?
I'm in South Wales. The boards are a straight swap so easy to do yourself. It only takes about 10 minutes and I can help with advice if you need any
Roland Certified Tech
New Member
Yes, same Main Board for VP-300 and VP-540. It has to be programmed, can’t just swap it.
If Ethernet works just one time the parameters can be taken from the old board.
If not, board will need to be programmed from scratch.
If Ethernet works just one time the parameters can be taken from the old board.
If not, board will need to be programmed from scratch.