• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help VP 540i Distortion, Double Printing, Wavy Edge?

P

player

New Member
I am having trouble getting a good print. Here are photos from a 48" x 16" Pantone chart I printed as a test. The left and right edges are wavy and distorted. There is a row about a foot in that things get scrambled along. The #17 is black and it prints that plus a ghost #17 1/4" away in red. The swatches are all scrambled and goofy running down the print in that one area. The lettering at the bottom of that area is
also all scrambled.

Any ideas?


20191124_140235.jpg



20191124_140325.jpg



20191124_140235.jpg




20191124_140436.jpg



20191124_140147.jpg
 

Attachments

  • 20191124_140452.jpg
    20191124_140452.jpg
    681.3 KB · Views: 167
Last edited:
Malkin

Malkin

New Member
Very likely an issue relating to the encoder strip, or it's sensor.

We cleaned and cleaned and eventually replaced our strip and still had issues. Turns out that our VP-540 makes more overspray than most (according to tech) and the sensor was covered in ink. Tech changed it out and it's been fine ever since. That was at about 7-8 years old, it's 11+ now.
 
You must log in or register to reply here.
Top