What all do you do? I'm seeing more than just signs / printing being done here
how do you operate the CNC without the computer next to it?
Do you have issues of the CNC dust getting on the media rolls?
We are a full service Tradeshow and Exhibit company and build the big displays you see at ISA, SGIA, SEMA, CES, etc. We're a turnkey provider for clients that want to exhibit at a show and we'll design, engineer and fabric custom and rental booths, take care of all of the logistics, shipping, carpet, furniture, as well as the installation and dismantle of the booth. We also store our clients exhibits when they come back from a show and refurbish them as needed (Thus all of the crates). We do a lot of Dye Sub Fabric and Vinyl mounted to sintra for the majority of the graphics we produce.
As far as the CNC, I'm assuming you mean the Mimaki 1631 flatbed cutter. We have a cabinet against the wall that houses the computer that drives it. We have another 5x10 shop bot CNC thats in the fabrication area that does create a lot of dust, but all of the graphics production (except for the Heat Press) is in the closed in area where the printers are. The media rolls you see near the CNC are additional rolls of fabric that are still bagged up from the manufacturer. After we open a new roll of fabric, it's stored in the graphics production area. There are some miscellaneous rolls of old media on that rack that we store there. Since that walkthrough was photographed we've put up walls to separate the heat press room from the rest of the plant.
