Wrapping a small freezer what should I charge?

[appstro]

An ice cream vendor came to me with a small freezer that he wants graphics on. Outside image area is about 20 sf. I will be doing the design for him and installing. I am going to use oracal rapid air vinyl. Not wrap material but still good for this type of thing as there arent really any complex curves. I will be laminating with oracal 210. Any idea what I should charge? I have a price in mind, but wanted to see what you guys think. Thanks for all your advice and input. :signs101:

 

[darby07]

How big is it? And he wants full color graphics?
EDIT: :Oops: Just saw the sf

 

[darby07]

Using cast vinyls + Install time I'd charge around $300

 

[D&Tgraphics]

If its the kind of ice cream cooler I think you're talking about, we have done quite a few of those and have gotten around $400-$450 for them.

 

[D&Tgraphics]

Is it like these?

 

[2B]

$304 + design fee using 3651+210

if this is going to be moved then a thicker lam needs to be used and the price goes up

 

[appstro]

Its just a small 7 cubic foot freezer from Home depot. My job costs more than the freezer did!

 

[D&Tgraphics]

Is the surface smooth or is there a texture? A lot of those ones have that textured surface. If so you will most DEFINETLY need to use cast.

 

[appstro]

Its actually smooth.

 

[darby07]

If its the kind of ice cream cooler I think you're talking about, we have done quite a few of those and have gotten around $400-$450 for them.

You can get that much for em'?? Must have a pretty nice margin!!

 

[Bly]

One million dollars...

 

[GAC05]

Charge them $250.00 and have them deliver it with 7 cubic feet of beer inside. Plug it in and start printing....

wayne k
guam usa

 

[appstro]

Thanks for your responses everyone. I was about $350.00 including design so I guess I was about right.