• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by PrintReadyFile

  1. Need Help HP Latex 560 Color Calibration

    Haven’t had much luck with PET films either due to the low heat tolerance. Best bet is always higher passes with lower heat like 180f and find the speed that cures your inks. Your problem sounds different.., unless the heat is causing material warp and is having trouble scanning the colour...
  2. Hp Z6800 Designjet - No Cmyk Onyx Profiles

    The profiling on ONYX for this machine gives three options: RGB contone, CMYK (stochastic halftone) and CMYK contone. I have an alright profile made with the basic CMYK option, but it does not access the light grey, red or matte/photo black. it also is close to the z6200 profile for the same...
  3. Hp Z6800 Designjet - No Cmyk Onyx Profiles

    I have been struggling with this one a while... and no one seems to have any answers. PLEASE HELP! We have had a pair of z6200's for a while now, and my company decided to give us a used z6800 from another branch. upon loading the machine we (including the hp/contracted rep) were VERY...
  4. Hp 570 Ink Limits

    You forget one simple thing... It's latex. Well, it's a plastic?&Water solution called latex. That means it gets sprayed on the surface and the water evaporates off leaving the pigment on top of the vinyl. Like most paints. When it is stretched, it is basically breaking apart the layer of ink...
  5. HP L560

    I have these issues as well, but to be fair, it also happened on the 370. What I noticed was that it wasn't my heat (but yes that is a whole other thing), it was the lip between the printing platen and the curing platen. Since rolled media still retains a little bit of curl, just after it...
  6. Need Help HP LATEX 570 - Anyone had issues??

    I have found that the 570 (compared to my old 370) has some major heat issues. Vinyls that I used to have at 210-220f now buckle at 190f on the 570. We just ran a job on 320gsm BloxLite c2s with no real success because let's face it, we shouldn't have... But I learned a lot more about how the...
Top