I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I have 2 printheads to replace on an Agfa Jeti 3020 Titan. I have replaced heads in a number of other UV, solvent and dye sub printers, but am new to this machine. Does anyone have a service manual about head replacements/service on this machine or any information on how to go about replacing...
We will be replacing the upper nip roller on out AGL. We were planning to do this in house. Have any of you had experiencing replacing a roller/have tips/tricks to make the removal and install easier?
We print to Kaspapir 105 and transfer to flag material and are trying to achieve good blow through of color so the front and back of the flag have a matching color. The issue we have is we get great color on the front, but only about 70 to 80% of the color on the back. We have clients asking...
I just did the MK3 on one of our Latex 360 machines. It was pretty easy. I also replaced the belt as the belt in this machine had a bad spot that was starting to come apart. I did all of this without the service manual and it was easy to figure out. Next one will be very very easy.
One...
We have a Kongsberg XL44 and need to add a new digital cutting machine due to our increase in jobs to cut. We are looking at a DYSS due to the price point and machine capabilities. Does anyone have good/negative experience with these machines and service. Are they reliable? We are looking at...
I have three Latex 360 printers. One of them is having issues drying the ink on heavy coverage prints. All settings and parameters are the same across all three devices - profiling, heat, optimizer. I cleaned the machine with the issue as the inside can build up with oily moisture. The...
I have not tried max ink limits. I will update today after trying that.
We do have Photoshop/Illustrator/InDesign. Soft proofs look good and we can achieve good rich colors on our UV machines.
I am having a little trouble achieving a good profile with Caldera and our Latex 360 printers. I have GrandRIP+ LE 10.2 and an i1 Pro with I1io spectrometer. I print a lot of IJ180cv3-10, so this is the main profile I am concerned with. Following, I have listed the things I have tried, but I...
I want to share a folder on the Vutek to the network so Caldera can rip files straight in to the machine. I need the password on the Vutek computer to do so and I have been unable to figure out what it is. Does anyone know what that password might be?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.