Search results

Malkin I'll ask support what they think. Gerber now has a USB to Parallel solution that works on XP and Windows 7 (32 and 64) but you need to upgrade to Omega 4.0 including Service Pack 1 (Build 15) smdgrfx - are you using a Gerber USB to Parallel we offered earlier (before the new...

With 2.1 I'm not sure you could do much but send data, not query and get data back. How is it connected, Com port or USB? Again, in 2.1 I'm sure it's just a simple HPGL hook up where only XY position and tool up/down commands are sent.

What version of Omega? - Omega 3.0/4.0 have regfixer might help w/o choke and spread

Omega 2.1 had it's issues, Corel has it's issue when generating EPS/AI files but I can not think what they were. For Omega 2.1 I think the highest EPS/AI version was 8. Also try exporting as CMX 5.0 and importing Time to upgrade Omega, 2.1 is old

When the security key is read the app makes a request to the security driver, the driver depending upon the setup will directly read a particular port (USB or Parallel) to find the key. If your security driver set is setup to read both USB and parallel ports then when the request is made the...

"Why can't these programs verify the dongle is there when you start to program and then leave it untill the next time you start up" because you user's would start the app. pull the key and never exit the app..... Make sure that the security key setup is ONLY searching the port where the...

If you are having problems placing a PSD file within AI you may want to read this. http://kb2.adobe.com/cps/892/cpsid_89260.html

Many of you know Joe was not a fan of Gerber (or Goober as he referred to us) but that’s ok, he always spoke his mind as we all should. So from us at Goober, God Speed Joe, you will be missed and there will be a Signmaker IVB waiting at the gates.

Ok, I found it @ http://en.wikipedia.org/wiki/Arc_(geometry)#Arc_Radius R = (W*W)/(8*H) + (H/2); If the Width (Length) were 68" and the Height were 8" In your case 76.25 = (68*68) / (8*8) + (8/2) 76.25 = 4624 / 64 + 4 That’s the radius, double that to get the circle...

Most likely when you moved to the new computer all your setup / preferences for the programs are not the same. That would be my first guess.

I'm not ging to get into a "pissing" contest here but it's all about the "size" of the inkjet market, it's not there for all of us to make a buck, so we're out. Cutters, router (Sabre) and Edges and aftermarkets live on.

All you need a a good shielded 1284 (Centronics) type printer cable. Nothing special.

"Thank God for little girls"....by Maurice Chevalier in the movie Gigi

Gerber's special folders can be found by using the Windows Start menu/Gerber Omega 4.00/Gerber Folder Locations/ then a bunch of folders are listed. Selecting one of these will then bring up Windows Explorer to that folder. These location are different between an XP system and Vista/Windows 7...

It's OK to clean it out but in no way has it to do with the pausing, believe me. We have thought many times about getting rid of these files and not creating them at all. All they really do is provide for faster rendering of a repeated job that contains image(s). When rendering occurs and...

I printed both of the spool files and had no problem. Now I printed from spool files while Peewee most likely printed straight to the printed (it still makes spool file(s)) but with a pre ripped spool file the computer is not ripping and printing at the same time. Also, know Peewee's computer...

Peewee - from GspPlot save the job as a spool file (under the File menu) and send me the spool file. I'll try it here.

I could ask a million question but start with this. In Composer have you "proofed" the image. In the View menu select the "Show Imaging Proof Colors". What this does is (now this gets technical) it converts the images colors (RGB or CMYK) and converts is to the monitor RGB but first goes through...

This error signifies that there is a mismatch in your software / firmware fire settings. In other words the FX material / foil firing info on the computer is not matching what is in the FX. Possibilities are that you have updated your software (Omega) but have not updated your FX. I think...

Odyssey - no material - maybe it can't - I do not have one here and never used one.