Search results

Yes, from what I see the foil is going down to "hot".

We'll it looks like we’re going to get hit by Irene here in Connecticut. The rain will not be the biggest problem but the wind is going to make a mess. This year the apples trees are loaded on the farm and we are only into our 4th variety. This is going to be a mess, apples on the ground, broken...

Remember there are 57 states and maybe one more to go.

Mosh, you on dry land yet? It will be snowing soon.

The back-cutting is really taylored for sprocketed cutters because for the need to flip the job over there are no targets to 'square" the job up. Also, the software controls the knife pressure via cutter commands. As for the IVB it may work but you would manually have to adjust the weights on...

The older USB to Parallel cable we offered is no longer manufacture. The chipset was the key part and they do not make it any more. If you have this cable it can still be used but you need the Omega 4 / SP1 (Build 15). We now offer a new USB to Parallel cable for Edge I/II users if they need...

You will need Omega 4.0 w/ Service Pack 1 (build 15) If you have the older USB to Parallel cable that will work otherwise you will need the new USB to Parallel cable. We have many people using this solution. The reason for the new USB to Parallel and new software is: the older usb to par cable...

Make sure that within your Color Management (Composer - File / Color Management) you have good profiles selected. The error message suggest that a profile selection is "blank". You may also want to check the AI / EPS "options" (button in the file save dialog). 2.61 is old and I would have to do...

Another thing is try slowing down the cutter (20% speed) - I know its slow but give it a try.

Now thats what I call a "green" sign. No waste.

I'm with Bill, I never win a thing, so threrfore I'm in, thanks

Depending upon which direction is off (-/+) it sounds like there is an unequal amount of pressure during the printing where the two ends have the same and the middle has either too much or too little. Just a thought.

The calibrate button is in the Plotter/Printer Select dialog in GspPlot (on the bottom). A dialog appears where you select the config of your best alignment. What this all does is change the y axis scaling factor for all you cutting, It ends up being a very small scaling and assumes the...

TEL, You could also try the calibrate test. If I read this right, the error is in the y-axis, which means something may be up with the belt. It's worth a try. You should print CALIBRAT.PLT on your Edge, and cut it on your plotter. If the belt is good, and you have lined up perfectly on...

Under Omega 4.0 and future releases we (Gerber) are playing by rules set forth by Microsoft in the area of where files belong. These locations change depending upon the OS (XP, Vista and Windows 7, etc) so we have a Start Up menu item under Gerber Omega 4.0 called "Gerber Folder Locations"...

Are the sprockets clean, any streaching of the vinyl hole pattern?

BikeStand, If you can get me the info off the label on the motor I may be able to cross reference it with something else. The System 48 has not been serviced in 10+ years and I'm sure we no longer have parts - but stepper motors are stepper motors so I may be able to find something. Let me...

In your Import dialog (where you select the file to import) what are your layer settings set to (lower right of dialog)?

Welcome from Gerber in Connecticut - my son just graduated from TCU and is living in Keller, TX. He refuses to come back to Connecticut and I do not blame him - love Texas

Bought it