Search results

I have heard that the IJ175 is good for installation, but a real pain for removal later. Have NOT tested any IJ280, but isn't 280 the series name for 3Ms reflective cut vinyl? We are still sticking with good old IJ180c here, seems to be the best all around product as far as install & removal...

Looks like the material is 3M IJ689CR-10 if I am seeing the "texture" of the cross hatches correctly. So, this would be printed & laminated reflective I'm guessing.

Tell them to hold off and bring you an S60600 instead. Get a good RIP, not Epson Edge. What laminator & plotter are you getting? If this i your first printer you're never going to need those other special colors you get with the 80600. We have 4 60600 printers and they all print all day, and we...

Nah, I mean they are supposed to last a while, but we had a 10-color that had BAD fading issues and Epson basically just said "those aren't warranted, sorry". We went with the dual CMYK heads and haven't had any issues since.

The additional inks are NOT warranted whatsoever by Epson. They will fade much quicker than the standard CMYK inks will, resulting in much shorter lifespans for graphics.

Print heads are the same, you can adjust the quality by changing the pass count on the prints. Quality is outstanding. You can dial in every media profiles on the printer itself for great results no matter what you're printing on. S80 uses inks that are not guaranteed to last outdoors. You...

I believe around $.35/sf depending on coverage & what inks you use. (We use 3M MCS inks here, so they cost more)

You need an S60600, super fast printing, CAN laminate within an hour, but really you should wait until the next day if possible; definitely wait for vehicle graphics. We have 4 currently and just plain work them all day every day. No major issues in years, but every now and then you might have a...

I agree 100% with WhiteHaus above, go with S60600. We have 4 currently.

I have a friend who recently purchased a printer & plotter, then decided to go with Flexi as their RIP software since it supposedly supports the (used) Mimaki plotter model he purchased. I am not that familiar with Flexi (I use Onyx & Graphtecs here), but he can print with Mimaki registration...

You just print on it, same as you would a white vinyl. The standard "white point" of the vinyl is now the base color of the vinyl you are printing on. You are only applying CMYK inks, so anywhere you are not putting ink, is showing the vinyl. A lot of films like these are probably not...

Here is another image that Gigapixel took from completely unprintable to printable. I've used it for a few years now, and every now and then it still amazes me.

Looks like decent vinyl, but there are a LOT of flavors of 3M vinyl that it might be... The laminate looks like (scratchproof) polycarb laminate, so in theory the vinyl combo shouldn't stretch. I would tell the customer you will do one as a test to see how it goes at an hourly rate and you can...

https://walldecorsuperstore.com/

Well, you either need a new CR duct kit, OR a new head. Get service out ASAP to start with the CR duct (since you're only seeing 1 color leaking) and if that doesn't fix it you'll need a new head. Had this same problem (not as bad though), and ours was magenta also, around a month ago. New CR...

Re-Upload it as a RGB JPEG file. (please?)

We use R-tape Clear Choice Mask when we need clear, it is pretty aggressive. I would recommend finding a printing partner that can print onto the printable version with a Gerber Edge so that you are not layering these graphics; that's how we do it here.

That adhesive pattern is not very even at all, I'm not sure that is legit 3M vinyl with it looking all swirly like that. If it is thicker and has the large cross hatches I'd say IJ160c also, but I haven't had a roll here in about 4 years.

Don't get caught with out it - (Dodge changed the hood for 2024!!!) 2024 Dodge/Ram Promaster Hood Template, 10% Scale.

2023 Sprinter Hood Template, believe it fits most other years, but YMMV. 10% SCALE.