Search results

If you can provide what the error message is or better yet screen grabs of any messages during the paste or copy processes.

If the dialog displays ?.??? then that tells me the driver is not installed, or at least is not "active". I would do a reinstall of Omega 1.56.

That message appears if the WarpNine driver is not installed. Running GQMgr, go to it's about dialogbox and what does it tell you?

Although the basic set-up should do the trick, is the aluminum you are trying to rout tempered? Is it a good grade aluminum? If it's a "3000" series aluminum with no heat treat (temper) it will give all kinds of problems. This type of soft aluminum will easily melt to the flute of the cutter...

parcheck is only going to tell you if the parallel port is a true ECP port. If that is what you want email me and I'll send you the file in the morning.

If you are running Omega 3.0 please try installing the Service Pack 1 for 3.0 as found on the Gerber WEB site. http://www.gspinc.com/default.asp?contentID=204#SOFTWARE

Export from Corel as PDF. Corel's Spot color handling simpley sucks. I have (not sure your using the same one) that replaces the userinks.cpl file with Gerber foil colors. It exposrt when using PDFs and imports fine. If you want the file email and I'll send it to you with instructions -...

Check out the FastFact on the Gerber web site #5049. If you can not find or get to it send me your email and I'll email the PDF

The Omega software is only tied to a particular version of the SafeNet driver because of a feature(s) we wish to implement. I have the latest version (7.5.1) on my system (Windows 7 64 bit) and can execute any Omega 2.5, 2.6, 3.0, 4.0 and "whats next" with no problems. The SafeNet versions are a...

Try cleaning the X axis opto sensor. It is located to the right of the drum. if thats not it you'll have to cal Gerber Service.

I'll ask service tomorrow - Wed and report back.

I'll assume your running Omega?? First, when you cut/paste and output selected or all are you setting up the repeats in GspPlot? Second, when setting up the job in GspPlot it is best to setup both the print and cut parameters at the same time, then print, then cut. Do NOT setup to print...

What software (version), what operating system? No changes since the kast time it worked? (software, hardware, etc)

Very cool Joe. When I went to the Signs and Murals page I got and error using explorer 8 which states: Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SearchToolbar 1.2; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR...

Tony D had you change your VM. This is an Edge I or II? When it seems to "stop" do any of the buttons on the Edge itself do anything, or are they "frozen"? If this is the case I would point to "static". Lately it's been bad here in Connecticut. I see NO reason to reboot the computer...

Since 1993 we have shipped 16,000 EDGE printers. :thankyou:

Damn, there is only one day left at this point. What are we to read on Monday?

Not my rules, if you want you can email some of your files and I'll se how they import.

The EPS, AI and PDF import filters have improved greatly in Omega versions starting with 2.5 - if you stay with 2.1 I would what others have said, reexport from Illy as EPS 3.0

I have seen a number of tile jobs printed on the Gerber ion, single prints on a single tile or an entire image spread over a large number of tiles. Looks cool.