Search results

you may need to use another profile that has 2 pass as an option. They may not have allowed for 2 pass because the quality would be unacceptable.

are you set up to print only? set your printer to store. Send your files, then load media, then go to queue and release

Every profile you download or receive from a manufacturer or even another printer needs to be configured to your environment. HP creates their profiles in a lab with perfect conditions probably in Barcelona or Alpharetta. Two different parts of the world, probably same controlled variables in...

You have had a printer for 6 years, required 1 service and now you need to replace a few Pips at $175ea? Id say you have gotten your money's worth. Have you had a PM service performed on the printer? You probably have some wear and tear parts needing some love. You can spend $2k and put the...

if you are going through that much cyan, you should nix both of these platforms and look at the Colorado...$.08/sq'

There is a pdf Pantone file you can print from the onyx samples folder that loads on your computer. Does your profile match the media you are printing on? you need to start there or purchase an eye1. If you follow any of the suggestions above you will get where you are going. Noone will have a...

colorado M series if you have the budget or Epson s40, 60 80

There should be a profile that downloads to leave a polished edge. It really just does a second pass to clean it up. Keep in mind, if you use your router bit for anything other than acrylic it will not give your the best edge. The router should be warmed up first as well. And if you specifically...

I can see that being an issue on the smaller table. I almost ordered that one...

I believe they had a promo at the last show that is still running.

I run 18 and 24 point all day long from Lindenmeyer Available in 4x8 sheets

Bad idea and if an inspection is required, it will fail.

Aren’t your segments controlled by your table size? I’m not sure where I would ever need to control a segment. I have a 5x10 Colex with conveyer, we throw a full roll of graphics printed through onyx and it cuts beginning to end with zero interaction. I am using a Summa basket in the front end...

It really doesn’t matter where you hardware or software is made..what matters is where it’s supported from.

You can get a Mac mini with their new M2 chip and have zero issues for the next five years…if you need multiple monitors (3) jump to the Mac Studio.

Take a look at Onyx Align…complete view of your business production and inspire into your true costs. Your going to need a software tip to drive your new flatbed printer and cutter..add this to the front end and you can drop jobs right into your top as you open a work order….

only way to get a service manual is to go the Alpharetta and take service training. as far as I know

79:04 is a generic firmware error. In the service manual I believe it is about 15 pages of items to check. I would remove all media from printer, power off and remove all printheads and ink cartridges. Unplug for 5 minutes, open the hood, plug back in and power up. The printer will tell you to...

Just because you are buying his business, doesn't necessarily translate to retaining his clients. Are any of them under contract? If so you want to speak with them to see if they will honor the transfer of the contract to you. It does not sound like he has any printing equipment if outsourcing...

thanks Mark