Search results

Nikkalite? Not sure about 54 inch on that though....thinking only 48.

We print quite a bit of duratex product. The 8oz with or without backer is nice. For our reseller clients, we always include a 3rd layer of solid vinyl on the perimeter to avoid grommet tear out. May want to consider something like that for the baseball field... Im unable to speak to the cost...

Avery 2921 works nicely. Air egress and removable.

gnubler".....I haven't found another trade printer that does. Came across a retail shop online that offers anti-graffiti with a 75% markup, you weren't kidding about it getting expensive." Give us a shout! We have anti graffiti lam we use on our prints. No problem!

IM ready to get another skid and store it in my shop. Damn

Oh man....was that done with the kiddie crayons from the family restaurant?

We do a LOT of printing for clients for wall murals and wraps. Our go too...unless otherwise specified by the installer/client...is the IJ40 Controltak with a Cast matte over laminate. Otherwise the Phototex EX is a great choice as well. Have done a number of jobs with that as well with...

Grimco has been buying up a bunch of the smaller distributors. We have access to 2 Grimco branches here, North NJ and Philly and get deliveries from both. If they dont have what we need we go to Harbor in MD or others down our list. 99% of the time we have good experience with Grimco but...

The max metal from Grimco isnt always extruded flat and can have low spots. I would have to say that is your likely cause without seeing photos. Its bitten us in the past as well.

Where's Balt....he'd know. Whats the Exp. date on the ink box?

Love it.

Ive had clients come to me and beg to differ on that statement.

We're holding steady on our pricing for now as well. No notice from our Coro vendor yet.

You'll kill your cutting strip most likely.

balstestrat may want to chime in on that option. Again, I don't recall if the cable or the motor fixed our issue back then.

Trailing or data cable? This wasn't mentioned above. I had same exact problem on my 850s years ago...just trying to remember what solved it.

which printer is this specifically? We used to get vertical bands on our old 850s. Consistent across the entire printed area or specifically just a certain area on the platen?

We like to do that way as well when the client is using clear polycarbonate or similar.

BIgfish may chime in on this....otherwise Dm him directly and he can probably point you in a direction as well.

Unreal