Search results

Same experience here with our RollsRoller. I think it’s 6metres x 1.8 metres, has laid down thousands of prints. Multiple users, it just keeps working without any hiccups for the last 10 years or more. We’ve replaced the cutting mat once.

Neolt have 80”. We have a GBC 80” but I don’t know if they still make that size.

We now have a Kern HSE100 with the Coherent DiamondE400watt laser ( measured at 590watts) after having a 100watt Chinese and couple of 320watt Chinese lasers and a Universal. The Kern is on another level and another couple of levels in price but it is everything I’ve ever wanted in a laser...

We have two S80660L running with zero issues.

If it's your first job, bypass the mitre join, use 4.5mm and just glue the returns to the face. You can also cut the face 2mm larger all around and route a 5mm channel in 2mm from the edge and 2mm deep and glue your returns into that and hand route the edge off after. This method requires you to...

Where I'm from, we have it spelled out exactly before any deposit is taken, as it can get messy and expensive. We usually run the feeds to a predetermined spot where a licensed electrician connects to the 240v. Like you, we can connect it.....but if the place burns down? This could either be...

An acrylic oven, ribbon burner or heat gun. If you have a cnc router, can mitre the edge and face for very neat and strong join. If no cnc, cut the face out, cut your strips (returns), glue the returns to the face as close as you can get to the edge of the face, but don’t go over and run around...

You'll get much higher vacuum with the rotary vane pump. Regenerative blowers are higher volume, lower vacuum, rotary vanes are lower volume, much higher vacuum. I've used both and there's no comparison, that's why the Becker is $15k. Most cabinet shops I know use either Becker or Busch...

No font that I can tell...You'll either have to trace it or get the Vector Doctor

It's Times New Roman Bold squished with outlines, stripes etc and an outline shade

ArtBrush (Medium *Oblique)

Are all your shapes ungrouped, no masks etc?

ObelixPro

Lethal Injector (Bold)

We have a Biesse Rover Plast S 43/22 (14x7) and it's been flawless. The toolchanger, drillblock and 3 Busch pumps (you'll most likely have 2 pumps) are a dream to have coming from manual tool change and blower type vac pumps. I've run a lot of cnc routers in my time and this is far and away the...

It can be done automatically on import or paste or whatever you send from Flexi by going into: Setup/Preferences/General + Merge Contours and + Auto cleanup tabs and ticking the boxes on Import and Paste

*Square

Camasters come with Vectric software… you won’t need anything else if cutting blanks and 2d signage. How many blanks do you intend to be cutting? Despite having a huge router 14’x7’ we use a guillotine, press with radius dies and an ironworker for punching round/ square holes. One man can get...

EnRoute lists a driver for Camaster so how it would go is: Design in Flexi click "Send to EnRoute" apply toolpaths and send to Camaster. Or... you can design in EnRoute and send from there.

You either have duplicate lines on top of each other or you need to increase the tolerance in the auto cleanup on import settings,