Search results

Even if they are not calibrated how hard is it to print a colour chart from both machines and then once it is completed in one printer match up the colours for the second printer from it's charts

You need to hire Newman and Kramer to kidnap the dog!!

OK Thanks

I am by no means a wrap shop, but the odd time I have to do partial wraps on trailers. This one I have today has clear silicone above the side door and I have found it along the top edge of the trailer under the aluminum trim. How do you deal with these areas?

Started about 3 months ago out of nowhere...the moment you latch a graphic on the take up reel and it gets some tension it starts moaning. I tinkered with it but the more force I put on the clutch the louder the noise....sort of sounds like a vibrator gone crazy. If I back off the tension the...

When I first read the post I had no issues, but today it is pretty slow loading

Just got this message today for the first time after a year and a half.... Turns out all I had to do was remove the usb at the back of the computer and reinstall it and she's back working.

Are you talking about the bubbleX? I have never heard of it before.... I have to research this product...is it good for limited outdoor use?

Purchased a new cutting strip.. will find out later if this is the issue. Thanks

They are simply 2" x 2" squares. I have flipped over the cutting strip.... third party new blade.... Can't seem to zero in on just what the issue is...I have also slowed the cutter way down so the blade does not skip ( not that I have experienced that) I have no intentions of having a tech look...

I flipped the cutter strip over...new blade I had pressure at 40!! that is really high for a new blade and it worked for one set of graphics and then the next 2 were half and half but all thrown in the garbage.

I need to figure out how to use my graphtec or summa to cut the decals off that machine and I'm golden!!

I still need my edge to print white on clear and that is about all I use it for. I don't change blades in this machine too often and my old blade needs so much pressure it was scoring right through one cut on every decal, making it very hard to deal with. I finally found a third part blade and...

No those are blades for the old 4b's...but I found a seller here that has non originals for $ 35.00... thanks

My Gerber dealer up here in the great white north wants $160 for 1 blade...is this the price? I haven't changed a blade in my plotter in years ( due to lack of use). No way I am paying that much for a blade. Just curious where you guys get your blades in the USA?

I am just wondering why you would use Calendered vinyl for this job? Cheap customer?

3ml with 3ml laminate will look like they have a fungal infection attacking them. Not sure how a cast film with laminate fairs....hopefully a few years longer.

It's unfortunate when areas of the country get freezing temperatures, when it is not the norm. There is no infrastructure in place ( plows, salt trucks, brine trucks) to get the roads to be even driveable. I have seen so many videos of car pileups. Scary stuff for sure...best to stay put.

Yes I think it is a combination of static and a hair.... I have lost some over the years. :)

I think you are correct as yesterday it was very dry in here... Had lots of issues laminating too...Hate Winter!!! lol