Search results

Main Board for Graphtec FC8000-60 / FC8000-75 / FC8000-100 / FC8000-130 / FC8000 | eBay Offer him 450..you've got nothing to lose..he can only decline your offer

Sign-in-China and eBay both have them. Original Graphtec Main Board for FC8000-60 / FC8000-75 / FC8000-100 / FC8000-130 | eBay https://www.sign-in-china.com/products/20699/main_board_for_graphtec_fc8000_60_fc8000_75_fc8000_100_fc8000_130_fc8000_160_cutting_plotters.html

And add your shoe size for good measure..gota make a buck some how :)

Feed Calibration..but note that versa over rides it

Change your profile or turn off color correction

Head fuse

In the photo i posted earlier, it shows you the location of the fuse. If you look on the Sign-in-China website at the fuse and the fuse holder. the fuse fits into that holder. https://www.sign-in-china.com/s/jv33_fuse.html Here is a photo of mine, to give you a better look at it. The head fuse...

Click Rip and Print again..go to panel, and shift the panel to only highlight the tile that you wish to print again, and hit send. or as AKwrapguy said..right click on the panel you dont want to print

Those sites are either scam or are high risk. Search F055090 on Ebay and the 4 from china are your safest bet. F055090 COLOR Printhead Printer Print Head for Roland FJ-50 FJ-52 CJ-500 SC-500 | eBay F055030 F055090 COLOR Printhead Printer Print Head for Epson DX2 Color 1520 1520K 3000 800 800N...

Buying a printer/cutter for doing one off in house runs is simple. Learning to do a cost effective production run is a whole new ball game..Be prepared to waste a hell of a lot of money and time on mistakes. The printer can't just sit around for weeks without ongoing maintenance. If you already...

The update tool should recognise what version you have and then ask do you wish install version#.. Anything version3 or below, should be fine for any head. 3.4 has to have green type connector and not locked.

Straight out of Sign-in-China https://www.sign-in-china.com/products/2132/original_and_100_new_roland_dx4_eco_solvent_printhead_1000002201.html

Best and cheapest advice I can give you, is take it to a local joinery shop that has a high speed sawbench.

Sorry about the photo..i just grabbed one off the net as a reference. to show location of fuse for the head..The one other problem I can think of is you have the wrong firmware for the head you have. You may need to downgrade your firmware.

mobile number??

If you fitted a new board, that fuse may not have been supplied in the board..check your old board. Think it is error 7 from memory if anything wrong with the head or sliderboard,, the blown fuse doesn't show in errors

Small white one up below the two capacitors between the 1st and second ribbon on the right hand side at top of board

Have you confirmed ink at the head..manually suck some through the capping station with a syringe..you will need a "Y" connector to hook the two hoses together... also check the 3.75mA fuse on your mainboard

Right click on the file and hit send from there, not print from the icon..Also check that the printer is showing online and ticked on the printer list.