Search results

We do have that same exact headboard in the second skit

must be my Vietnamese wife then, jk she doesn't work Charge for design/mockup or send such bad resolution mockup that it can't be used by someone else

Sticker Mule = $525 for 300 sets (900 stickers), I'm sure there are coupons out there too

Maybe it's whatever the county mosquito truck sprays at night

I guess I'm just in a competitive area and use online retail prices as benchmarks, I have 20+ sign shops within a 5 mile drive of me, on my 5 minute drive to my shop I drive past 3 other sign shops There are 30+ fastsigns within a 30 minute drive of me.

Why do you need acid resistant? If their battery leaks then they have bigger problems than a ruined sticker or maybe they'll be happy the brand name label is corroded off. Any high tack vinyl should work

Ok add another $250 for the expensive materials = $750 total

Sticker Mule and other retail sticker places come out at $525 for 300 of each sticker in those sizes (900 sticker for $525)

I would do that for around $500 total depending on material/laminate, print 30 min, cut 45 minutes, set up etc 10min, maybe $100 in materials?

I have couple of big banners (5ft x 40ft) printed almost 2 years ago on the Colorado, screwed to a building in full Texas sun and they look new still, 0 fading. and most memorable thing was the 40ft banner taking 15 minutes to print

https://www.breninc.com/product-category/materials/stencil-material/ bren inc

Get a Colorado, it ends up being cheaper that HP/Roland if you are printing a couple of rolls per day based on ink savings.

Directly from Canon

I purchased a service plan for my colorado 1650, while not cheap it gives me peace of mind knowing my printer will be fixed asap with no surprise costs. I was on the fence of about getting a service plan but glad I did. So far 3 minor problems that were fixed same day. One roll per month...

Fixed with help of Canon support a .SET file went corrupt and needed printer name added in again

Onyx 21.1.1.175 Canon Colorado 1650 Everything has been working fine for almost 2 year and today get this: Server is starting... Error #4: Unsupported printer - '' ...Printer Offline! (Error) Failed to open printer device- Onyx can see the printer IP address in the settings, IP...

Put the cutfile on USB drive if you have FC9000 or send it through cutting master if older Graphtec models. Very easy to do once you get the hang of it Versaworks doesn't need to know anything about cutting, you just print the file that contains the registration marks already created with...

Use cutting master to create the Graphtec reg marks/barcodes

Graphtec reads marks on it no problem

My main credit card seems to get fraudulent charges on it once per year but it's a very easy fix with capital one, couple of clicks online and a new card arrives in a couple days. Last fraud activity happened about a month a go, I got gas at a shady gas station and a few hours later got an...