Search results

Each one of those "steps" you see will be 1/300 of an inch, and it's not going to get any better. No matter which dpi you set the FX to print (be it 300, 600, or 1200 with the firmware update), you're still limited to 300 dpi along the head axis.

I only mentioned the Lexan because that’s what we have on hand - print it all the time.

Does it need to have the textured laminate? Either way, we’d do this on our Gerber Edge. If you didn’t need/want the textured feel to it, we would just reverse print onto clear vinyl, and you could stick that to your piece of glass - or acrylic - or whatever. Or We would cut the acrylic with...

I'm sure it's something to do with the (uneven) pressure of the printhead across the material. Not sure how to adjust that, or if it's even possible. Could also be uneven material... but that's a little less likely. A couple of things that I've found helps: Set the black to OVERPRINT (not...

Anyone here in Kelowna?

Thanks for the suggestions. Swamped here at the moment - but will try to get on the horn with people mentioned above in the coming days!

ND has told me repeatedly that 3690 was discontinued, as well as SC50. Was told that the 3200 Series I had ordered was on backorder since February. All of these are readily available 'Stateside. Someone needs to get their act(s) together.

I need several different materials. Engineering grade reflective 5100 Series or 3200 Series - whatever, intermediate grade vinyl 50 Series, 3690 Series, and more. No one in Canada has it. It's readily available all over the US. Problem is - the US sellers aren't 'allowed' to sell it to us...

I like foils. Last time I bought them in bulk from someone ‘closing out’ I think I paid about $30 for each. Some were full… some were almost completely used. Some were over ten years old. It was just easier to say $30 each than trying to figure out the price for each and every cartridge...

I just use "beige" .

I used to have an issue like this with PermaGrip... it was the material, but I found that it was only because it was wound too tight. If you unroll the material the day before, it seemed to 'settle' into a smooth surface. Hope that all makes sense. At the very least, I'd try unrolling it...

Thanks for the feedback! I think we've come to a compromise with the customer, and we'll apply graphics to the straps, instead!

Anyone tried using heat transfer vinyl on a YETI Hopper? I usually experiment with an 'extra' to get the setting right - but at $400 a pop, I'm a little reluctant for this product.

It's always been that way, unfortunately. You'd think they'd be able to fix that. Maybe for Omega 8 :P

Ok - where??

For all the grief I get from buddies, I still love the fact that I've stuck with my Gerber Edge(s). They excel at orders like these!

Had it running up until yesterday :( Just went through a move and wonder if something pooched the keys.

64 bit Windows 7 Professional Service Pack 1 Driver is SafeNet USB SuperPro/UltraPro 7.5.8.0

Truthfully, the upgrade might be finally worth it, if not so much for the 'advances' in the software, but so it will work with an o/s and hardware that's less than a decade old. I've got an email to ND (Linda) and will see what happens. May be sending you some files here in a bit. Got an...

Ugh. Not entirely sure what happened. My best guess is a driver was updated. I've 'rolled back' the computer, and I still get the same response when I try to open Omega. Full disclosure: I (was) running Omega 2.61 on Windows 7. I've got the Sentinel Driver up and running just fine (as far...