Search results

I loved Advantage Sign Supply. Grimco ruined that for me.

Try 3M SC50.

I’ve often found the people at 3M Canada to be less that helpful…. if I get a response at all. I’d be getting in touch with someone from 3M in the ‘States in hopes of yielding a better result. Sent from my iPhone using Tapatalk

Oracal 970RA Fir Tree Green Metallic. Sent from my iPhone using Tapatalk

The B-Free from Mactac needs to be applied dry. It’s got air egress channels in it. I would think uneven force/pressure on the squeegee is your issue. Sent from my iPhone using Tapatalk

Does it have "fit small text to path" ?

I'm going to guess the difference in the amount of blue foil and red foil left in each cartridge is quite a bit different... If I ever have to have tight registration between two colours for an important job, I try and use foils with similar amounts on the roll. For your real issue, see if...

A client (Private wine store) is rebranding. In addition to wraps, they'd like to incorporate a giant wine bottle on top of their dlivery vans, as well. I don't even know where to start. Any suggestions? My initial thought would be some place like the Imagination Corporation, but I don't know...

I'd try something like this:

Just looks like you forgot to set the blue to overprint/overlap. Make sure to move the blue shape to the front, and have the Print Order setup correct as well.

Thanks. I'll go that route if need be - but it looks like it might be a stock illustration from somewhere. If I can purchase a file for $10 to $15 it'd be worth it.

Anyone seen this image in any collections? I've exhausted everything/where I know. TIA

I've got a Gerber GS15+ that will have been in use for 20 years come November. Haven't replaced a thing on it (other than blades). Bought a Summa in 2008? for a job that required wider media, and it paid for itself on that first job - ran 50 yard rolls of reflective and 3M 180 without issue...

Good info (leading to lots of questions) to go back to my customer with. Thank you!

Anyone know how - or have the ability to convert a vector file into something an embroidery place could use? A customer of mine's is looking for a DST file. Not sure if that's generic enough. I've got the file in illustrator, and can convert it into just about anything - except for any form...

I can't speak to the others, but I'm pretty sure the "last overlap" function is how much the Edge rewinds and reprints if there's an issue with the foil (end of foil/it breaks/you open the cover while printing, etc....).

Was that perhaps your first run of the day? Or at least first print in a couple of hours? I’ve found now that my edge is a little older, it sometimes needs a bit of a ‘wakeup’... to get the head warmed up. For that, I usually create an 11.8” x 3” rectangle to print. Everything prints...

Adjust your heat/pressure settings for the blue. Make sure it's set to Overprint (as opposed to overLAP). Double check and/or change the heat setting in GSPPlot to "Hot". For the adidas decal - is there a reason you're not just printing blue onto white vinyl? Looks like you could also just...

Stouse for sure. They have no trouble shipping to Canada.

Flat Cut Out