Search results

Every carrier sorts their own mail for their route. Just let the carrier know or write in Big Red letters delivered to wrong address and put back into mail box, they will pay more attention after that.

My Graftec 9000 is running great. Must have Flexi 21. Set job up, position job to the right side 3" from bottom. In Cut window, select cutter, click on Options in the Registration Mark box, check Use Bar Code. Bar Code Type set to Roll Media, click OK. Send to print. After printing put media on...

Yikes. I never looked. Always do one at a time

That cutter will last you another 20 years

Sorry for the delayed response. Set job up, position job to the right side 3" from bottom. In Cut window, select cutter, click on Options in the Registration Mark box, check Use Bar Code, Bar Code Type set to Roll Media, click OK. Send to print. Hope this works for you.

We use a Challenge 30 inch cutter in our sheet fed printing department. Found it used 20 years ago and still running strong. See them all the time on ebay.

Open image, ungroup everything, delete all cut lines, do it twice because who ever put the original cut line on got distracted and did it twice. Put new cut line on in a different color. This will fix your problem. Remember when grouping multiple images all cut lines should be the same color and...

I use General Formulations 220. Great stuff. 12 to15 roll a week.

Grimco Briteline is made by General Formulations.

My two Seiko W-64 never had a paper jam error but an occasional Media Misaligned error. There are two sensors, one on each side of the print carriage. Most leading cause of media errors. Wipe them with your cleaning solution.

Try turning your crop marks inward instead of outward. The 8600 reads the inside of the marks.

I just finished installing my fc9000 and learning to send jobs to it. Its not that complicated as Steve-P has described. I'll post when I get back in front of my computer. Only added about two extra minutes to create and send job

General Formulations 220. I have put this material through the tests. Going on two years on a coffee mug, ink is fading but vinyl is still adhered to the mug. Un laminated

Have the same issues with some products that are labeled. Now I use Crack N Peel Sheets and I print them on our offset press or Digital Copier then Cut them down to size. Problem solved for us.

Usually happens at the end of a roll of media. Power printer off then power back on after a few minutes.

I use a 30 for everything. Kiss Cut and Cut Through.all cuts are cut in the channel not on the hard strip.

My graftec 8600 130 Cutting 30 sets of 5 colors grouped. Cut 5 sheets of these. After cutting I alligned all 5 sheets and punched them out together, it took less than 5 minutes to punch 750 total stickers and to seperate the colors. If I can figure how to post the video here I will.

Im printing on two Roland xr640 and doing all my vinyl cutting on Graftec fc8600 and fc9000. Straight thru and Kiss cut, I dont ust the pref cut anymore its too slow.

Something is binding up.

Goatshaver, Do a one cut process instead of two cuts. Try reducing your blade depth to a minimum and increase your pressure or reduce your pressure and slowley increase your blade depth. I have four Graftecs, a fc2250 which I cut magnets on, two fc8600 and the new fc9000 which cut all my vinyl...