Search results

wow! I'm semi-famous! lol.

Thank you. I will look into this. This is my ultimate solution and I'm exploring other avenue. A cutter would be faster and I hope cheaper than a CNC type.

Those are good options, but I will have to make lot of small cut (40 or 50 cuts in a 4x8). So I was looking for something with a computer than will adjust itself like the paper cutter. I've check them out, but they don't have something close to 100in.

Hi, I don't know if it exist. I'm looking for a guillotine type cutter the electronic type like in the print industry (see picture). The difference is I would like to be around 100in long and be able to cut coroplast and ACM (3mm). Is there such machine anywhere?

I've never laminate window perf and it's one of the easiest material to install. Never had complain either about the dirt and I'm in Canada with real winters.

I would be between 1.50$/sqft and 1.75$/sqft if it is all ground work.

This is the problem. I don't know the limitation/variant of the bodor vs trotec. Other than, ''It have better part and service'' I've never had a real answer. And is it better to value a 10 times prices? If yes, how precisely. If I take the same analogy, the audi ttrs does de 0-60 in 3.5...

Thanks all for the response. I understand the service part and maybe the quality. If it was just a double or even triple the price, it would be a no brainer. But it's 10 times the price difference between the two. If I have to buy a bodor every 2 years because of any problem, I would still save...

So I'm doing my homework to eventually buy a laser. Since I never operate one, I don't know much about it. There is a considerable price difference between a trotec laser (big brand) and bodor laser (chinese brand) for similar specs on paper. I've asked to trotec what is the difference and other...

this product is very good. I use a similar version made by metamark. Also, the premask adhere better on the liner of those one because it's paper. If you are worried about scratching the acrylic, start by leaving the protection film on it and lay down some leftover backing paper on the...

I use mostly the 3M gold ones or the wetedge. For frosted/clear vinyl, I use a bluemax with handle. I also use the original and aluminum BigSqueegee for certain jobs.

I just did a 48in X 25ft piece last friday. It's a 2 man job, but doable. In your case, if it's on acrylic, it should be relatively easy with a laminator.

So I've uninstalled the driver and install the latest one. I will physically check the port (I have the same problem from the 2 ports in front of my tour). I don't have any problem other than with my cutter.

I will follow this. I was looking about it.

If I use the 2 usb port on my PC, I have the same problem. So It coud be the USB driver then?

For some time now I have a connexion problem with my summa D160R. It's connected via USB since there is not an ethernet port on this model. When it's connected to my PC and cutting via winplot, I lost the connection after every job. I need to unplug the usb and reboot the cutter. If I connect it...

Unfortunately, the only response we got from phototex was a paint problem. Even if the same problem appeared on the material installed on melamine. The customer asked to remove the whole job and we will use regular wall vinyl.

Hey, I just wanted to make a follow up on this. So I've bought the cordless heat gun just before christmas. So far, I really like it for our murals and frosted vinyl install. Yes the heat take a bit longer to go up and the fan could be more powerful, but at 150$ it's a great tool to have. It...

I've never tried to cut aluminum thicker than 0.040 and ACM over 3mm. For the banding, flip the part over and slide a metal tube on the edge. It will go back into it's place. Like I said, it's not the perfect cutter for this, but I only cut those kind of products in small part one or twice a...

I was told that they closed the division and the product is not available anymore. I very liked the product.