Search results

Epson The new ones will not.

Roland I have it, shoot me your email and a note on what you need

Selling the business Get a broker and do it right I see people spending hundreds of thousands on sign franchise stores, people are willing to pay to have someone with an established business hold their hand while they start out. Get professional help, if the broker sees no value he won't waste...

Any techs in the bay area have the ability to change out a GS6000 print head and cap tip? Parts will be provided,

That Mutoh replacing the maintenance station or cap tops.X 2 we have them at www.solventinkjet.com

Mutoh We have those heads if you need them, and we provide tech support at no charge. www.solventinkjet.com

print heads Scam Look at what they are asking for printers? Had a customer contact them, they only take wire transfer. too good to be true

Dampers I would start there. How old is the printer? make sure your cap top is clean and sealing against the head. i would do the damper first and then think about the maint station we have dampers at www.solventinkjet.com

Tech support Shoot me a pm and i will send you the tech manual, mention what printer you have in the pm

That head Is there air in the line? The damper should be 50% to 75% full. Clean the area around the rubber gasket that seals around the head when it is over the capping station. Put that head back in asap as you will dry it out and yes you will need to adjust it. Pm me for detailed instructions

Yellow and black Did this happen after you changed the caps? That printer has six heads and six caps so there shouldn't be contact between the two heads. Is your pump ok? Pour some cleaning fluid in the caps and make sure they drain. Maybe there is a block in a drain line and black ink is...

Roland Shoot me your email and I will send you the service manual

Roland manuals PM me and note which printer you have and include where to send it.

Main board Mimaki keeps them on file, contact them with your serial number in hand

Air in lines If the air is showing up by the top of the head, it could be a leak in the damper or the connection to it. change out the damper. contact me if you need a source for them.

Iron? Those are for the Mimaki, stick to the OEM they work better. The foam in the Roland caps is there to prevent ink from splashing back on the head. we have them at www.solventinkjet.com

300v As I recall you need to move dip switch # 7 on the main board.

That head Pull the head, gently, gently push cleaning solution through the head and watch the spray coming from the nozzles. If any of the nozzles spray to the side, that is the issue. Try putting the head is a tray of solution and draw back to the syringe, you may pull the blockage out of the...

Epson heads Epson tells me they should be stored with transport fluid, which is an ethyl glycol product, pending that cleaning solution,

Arlon 3590 VTG how did the arlon 3590 work out for you, i have customer working on those type of helmets