Search results

here is how it works If you have a return policy the customer must sign off on it. The credit card company needs you to prove to them that the customer was aware that the sale, deposit, etc was not refundable. put an x____________________ under your return policy and make the customer sign it...

Service manual Pm me and ask me for the manual and where to send it

soak the heads if you want to leave the heads in the printer, put some clean cloth soaked in cleaning solution in each of the cap tops. You will need to lower the capping station to do this, the printer came with a tool to do this, looks like a metal tube the size of a pen. PM me and ask me for...

Heads Sounds like bad ribbon cables or a blown fuse, there are not pumps for each head. you can switch the head to another spot and see if it works. PM me and ask me for a tech manual.

Soaking heads Depends on what inks the printer was running. The safe way to go is to use the solution provided by the ink manufacturer. The home brew is great for cleaning and flushing caps and pumps but you need to be careful with those heads.

Like new JV33-250 running ss21 inks remaining factory warranty (6 months) Call me for pricing Robert 303-733-6671

Sign Add Check out their Sign Ad product. satin finish, great to use where static cling wont work www.catalinagraphicfilms.com

Cap top Change the cap top and then the pump, Unless the head is leaking ink that should not be the problem

Roland manuals check your email

Mutoh vs Roland Both printers are using an eight channel Epson print head so the image quality should be close as they also use similar inks. The Mutoh will come with the auto take up where Roland charges an additional 2k to keep your prints off the floor. Mimaki may be worth looking at...

Gateway printer Hapycmpr Now that you are hooked on Jr, it is time to move up to the hard stuff. We are offering great trade in deals toward the new Value jet printers. Discreet on site installations available.

ink Are you using bulk ink. When the banding starts is there still ink in the dampers? Unless you are getting air into your lines, the ink lines should not be the problem. To check the cap top, pull on the like from the individual cap with a syringe, you should only see ink, no air. I think it...

print heads I don't think Roland even has heads for that now, you can put Mutoh falcon heads in it but that will cost you more then 1000.00.

Old printer We have experience with that printer after a long layoff. Lots of things you need to do, contact us at 800-328-1306

ink costs Roland 440ml cart suggested retail 129.00 Mimaki 440ml cart suggested retail 124.00 I would guess, I repeat guess that because the Mimaki has an on board cleaning cartridge and uses that instead of ink to do cleans it may in fact use less ink. Mimaki should look into this to see if...

New printer Why not add a printer cutter if you already have a print only and are looking to expand

DX 4 heads We have them at 825.00 with two dampers Ship from Denver Colorado www.solventinkjet.com

Dye Sub Maybe possible with a ton of flushing, but not something to go back and forth with. cheaper to buy an old Epson water based wide format printer

Capping station keep an eye on that capping station. the foam pad is starting to swell up and could cause the ink cartridges to drain out by wicking against the head. The new cap station has a screen to prevent that from happening. The new ones are shown on our site www.solventinkjet.com

Roland tech manuals I have most of them, send me your email