Search results

Spring There is one that goes under the cap top to the assembly that the cap slides back and forth on

Fine cut on a Roland? Can you cut on a Roland with Mimaki software?

Those inks Have them send you an MSDS sheet and take a look what is in there. You can compare the chemicals to the OEM inks (their MSDS will be on their site) BTW, ECO is for Economical, they use masking agents to reduce the smell.

Take a look at www.digikey.com

1800.00 a day is nuts, where are they flying in from, Japan? Go to the Mutoh web site and find a local dealer.

we have the ink at www.solventinkjet.com

Get a test print and have them do a sample print from a file you supply Roland list on those heads is 1000.00+ I would stay away from the Ex as it has six heads

Manifolds I have the manifolds on my site www.solventinkjet.com be careful how you flush that out, wrong fluid and too much pressure can ruin it.

Pump I have the part give a call to 800-328-1306, ask for Robert

Flat bed Mimaki has a new one, LED and "special" Ricoh print heads. Said to be very fast and priced right. Didn't see it run and have no specs on it yet, but maybe worth looking at.

Mimaki vs Roland They use similar inks (maybe the same, depends on who you talk to) Running that ink set will slow down the printer and you will need to laminate everything going outdoors. Shop your dealers and get the best price. The Mimaki does have an auto take up that works with the print...

Neither Looks to be the generation after the DX5, we call it the DX6, some call it the DX7. Eight channel head same as the newer Mutoh's and the Epson GS6000. same head as the new Roland that just came out. Cost about 2400.00 to replace

Epson I don't see how or for that matter why Epson could make a change to their DX5 heads so that they would no longer work in some printers and not others. The DX5 has been around for years and used in a wide range of Epson products. There must be 100s of thousands of printers using that print...

Firmware make sure your firmware is current, they had some fixes along the way.

Pump Did you do the pump?

makes sense Something must have happened, because a two headed print only unit based on older Epson technology (GS-6000) is not "rocket.science"

I be wrong No cutter, just a printer. I saw the price of 35.5k and just figured it had to have a cutter. So what does this one have over the Mutoh 1638 or the Epson two headed Sure Color S50670 , besides being red.

New Roland, count down is over It is in fact set up with two 8 channel Epson print heads. So if you added a cutter to a Mutoh 1638 this would be the new Roland. The Mutoh can be had for 22K with the trade in of any 30" or better printer. The new Roland is said to be 35K plus. It is a fast...

Good Luck????? We sell Epson/Roland print heads. We supply free tech support. Factory trained in Roland, Mutoh and Mimaki, with 3 techs on staff. Not every Roland owner has a hot shot service tech down the street. For those folks it's either fix your own printer or wait two weeks for a tech to...

Parts costs I had a customer in today talking about how he had to change out two print heads on his old Roland. I checked my files and we had sold him the printer back in 2004! Not a bad cost of operation.