Search results

The single pipe just drops down the big pipe and was originally just taped in position so it stayed in place. As it is just the drain from the pump it is ok to just insert it as far as possible down the large tube. SC

Thanks for that Print com. I have read this error can be a whole lot of things from sensors, bad cartridge chips to the machine hibernating because of being off for such a long time. The head height mechanism is missing on this machine! I have the cover but their is no lever inside. How does...

I picked up my JV3-160S today. I reckon it has been off line a lot longer than the seller said! Still it powers up and came straight out of a working environment. When pressing the head test button it comes up with error 30. I have read on here this could be a few causes but would like...

Can you still do test prints even though the chip has expired? SC

Is their a way to by pass the chips temporary? I am trying to set up this machine but need it in a fully working state to clean and run test prints. Once this is fully operational I am going to fit a bulk ink system so I no longer need cartridges and will have permanent chips. Thanks SC

OMG I got it wrong!!!! The machine is a JV3 160S not a JV3 160SP I understand this has only 3 printheads! Can this still run just CMYK rather than CMYKlclm? Does anyone have information and manuals on this one?!!! Sorry for the mess up, good job this was very cheap. SC

Thanks for the advice Mike but purchasing a set of cleaning cartridges is not cheap and would cost me over a thousand dollars in the UK. I agree replacing the cheap parts such as dampers/ribboncables/wiperblade and even cap tops is the way to go. But their must be a way of pulling cleaning fluid...

I am on with purchasing a JV3 160SP. It has been left unused for 3 months and the owner reckons only the CMY is printing the black is empty and the lc and lm are not working. This was used in a company running banners through for a national fitness chain. The guy who was supposedly operating...

Remove the docking station completley and clean the wiper assembly. it gets jammed with solidified ink over time. Is it jumping when it ceates the CR2 error? SC

Some pictures would help but I am guessing a dirty encoder. SC

What different advertising and marketing methods should i look into? I am at a loss lately what to do next as probably I have already tried other methods of drumming up new business. SC

I've been in the sign game since I was 17 (46 now) i know nothing else except I was an apprentice electrician and engineer, this has helped as I am very apt at repairing stuff myself saving thousands a year. I run a shop were we specialise in Vehicle Graphics, Wraps, Banners, Shop Signs, etc...

Being all signmakers or sign people on this forum. What new markets would you suggest getting into? Business has slowed right down (almost stopped) and just looking what other work for us people with large format printers, plotters and other signmaking gear their is? SC

Swap out another cart then try that one back in. Or contact your supplier and get them to send a new card. SC

Using Wasatch 6.2 at the moment but we have always had issues were sometimes it will not create the contour cut file properly. I have been in touch with Wasatch and as per usual they blame the hardware and software it runs on. Strange as when you reprocess the file it works fine! Wasatch just...

I may as well be the first to answer on this one. I reckon you are already using the correct material for the job especially with the rivets and conditions this is being used in. As I have found, if you find a material that is easier to remove usually means it does adhere that well in the first...

Workflow....What Workflow!? There are four of us and although my 2 partners have both their limitations One of them designs like he is a 2 year old and needs good crayons! We employ one other guy who is proficient as an installer but is limited in designing but this is good as he knows his...

How can I help you? Why would I want to connect to Teamwiever control?!

Well it is very rare for a second user Valuejet to come up for sale in the UK and when they do they are prohibitivley overpriced. At the moment buying a new one is out of the question as funds are very low especially after getting my valuejet back running. The new Valuejet 1624 runs different...

Is this a usable machine as a second machine as it seems their is varying opinions? SC