Search results

Encoder 68.00, I can arrange for you to pick it up from Mutoh directly if you like

ink line We get 1.00 foot for the 2mm ink line at www.solventinkjet.com

o rings check the o ring under the brass nut above the damper

Tubes The tubes should be able to go from solvent to water, the problem will be the print heads, they will be difficult if not impossible to convert.

1324 We can do better then Fellers if you don't need on site install & training Give us a call 800-328-1306

Chips Pull them out and look at the slot on the side where the out of ink tab appears. if the tab is sticking out they are empty. if not putting them back in should reset the internal ink counter to full. That was how they used to work unless a firmware upgrade has changed something, Anyone...

tech manual shoot me your email and I will send you the tech manual

Dampers www.solventinkjet.com what makes you think the dampers are bad?

Spare parts we can help you with the Mimaki, Mutoh, Epson and Roland parts www.solventinkjet.com

Dg-41179 I stand corrected. Never noticed it before, funny Mutoh only shows it for use in the 1304 model when it should work in the 1204 and 1604 as well.

x2 I agree with a cable change. We had a printer the would print fine without the top long cover over the trailing cable. When the cover was reinstalled it would short out the cable and cause all kinds of print problems. No visable damage to the cable, just had some bad wires inside it from all...

cutting strip That depends. If you don't ever cut through the vinyl and backing paper they will last for years. We usually see a new plotter owner order one up after a few months of ownership and then not need another one for years,

Cap top As Mutoh only sells the complete station you will not see anything from them. if I was you I would pull the complete station and clean it up rather then just trying to change the cap, I know guys who can do it but your first time may be easier with it out of the printer. Make sure you...

Flexi upgrade I can get you a competitive quote if you need one robert@signagespecialist.com

Flexi 8 That is the end of the line for Flexi and Mac, they currently do not have a Flexi 10 for Mac. May be cheaper to run with the manufactures RIP on a Windows box as a RIP station.

Cap When you pull ink down are ther air bubbles mixed in? I think the cap is bad. The ink carts are reading wrong from all the cleanings. Call your dealer and get some new cards, trace around the old one so you get them back in the same place

Mimaki parts We don't stock it but we can order it for you. www.solventinkjet.com

Tech I have the tech manualif you need it shoot me your email I have parts if you need them Robert www.solventinkjet.com

Epson The Epson S70 is going to give you the best results for fine art and give you the speed you want for signage. It is the only 10 color printer in the price range and one of the fastest with 520 sfh in production mode and 142 sfh in high quality. If your budget can't take a 26k investment...

Warm call I like your approach of following up on your mailer. Hopefully the prospect has seen your piece and he will have some idea of who you are. The key here is to ask the right questions once contact is made. Often the prospect may not need your product today, but he may need it in 3...