Search results

Thanks for the replies! As for a definite line to lay knifeless, no there wont be as the transission is kind of gradual. I didnt think about automotive clear coat and have never tried it. Swinging a paint gun is no problem and have done it many times over including cars. In this situation I...

I am doing a wrap on a truck and I need some suggestions to see how to do it and if it is even possible. The design is petina/rust, faded paint look at the front of the truck and then just before the bed it will transition to "new look" with graphics, crisp lines. The client is asking if its...

Try placing the file directly into a open illy file. If that dont work try this...... https://illustrator.recoverytoolbox.com/online/#/

Yes I just ran the cord through the machine and out the pack between 2 panels and into a outlet. Leave them on 24/7 for 3 years now.

I put them under the lid of my xc540. For security I cut some laminate patches and applied over top of them to make sure they didnt come loose.

Kuenstler Script LT Medium is close. Not a perfect match. THe capital letters are the biggest difference.

https://www.findmyfont.com/index.php/fonts/font-preview?fset=Letterhead%20%2F%20%28Commercial%29&ffam=Romana%20Classico%20LHF%20-%20Normal&fstyle=&fsize=60&fid=65d11468f829e8e906bcf1ccb9684587&wrap=2&text=DMEP

Or has the laminator ran enough 30" material that the rollers are permanently smaller where the 30" has ran and thats the center area now with 54" and there isnt enough pressure in that area?

Ok I am with you now. Yes there is a setting for that. I am not near my printer right now and the setting name escapes me. I think the main reason they set the machines to make full passes like that is so that it dont wear the encoder and stuff in certain areas. Everything wears evenly this way...

The only way I get a "good" black is with using Rolands spot color black. Most everything I do is PrePress setting and with the profile for the media. I do alot on 3165 and it turns out good. I had my machine profiled and we turned down the ink limit so the darker colors were drying better. My...

Honestly have never used the simplify tool. It seemed to help a tiny bit when saving. Thanks for the tip though.

The artwork is 111" by 36" and there are 2 of these on the artboard. I moved each one to a seperate file and was able to save them individually. I should of done it in the first place but I forgot that. Each file is right at 1gb. Yes there are alot of gradients among the thousands of anchor...

So I have probably asked this already to some degree but I still must not grasp the best method or way to do it. I have a all vector file with some effects in it. Illustrator will not save it, eps, pdf, tiff etc etc. The vectors have LOTS and LOTS of nodes making them pretty big. I dont have a...

Just go into the sub menu and go through the steps of changing the wipers (even if you dont physically change them) and see if that clears the problem. My guess is no but I am no expert.

Pretty sure this would work. only a tenth of a mm smaller. https://www.amazon.com/Cutting-Plotter-Protection-Roland-Graphtec/dp/B01DP2H8CM/ref=sr_1_fkmr1_1?ie=UTF8&qid=1529366036&sr=8-1-fkmr1&keywords=1%2F8%22+roland+cutting+strip

Well if you have more solaris cartridges throw them in to see what it says. If you have some OEM laying around take the chip off them and put on the solaris to try and trick the machine. First thing I would do is try to get it cooled off in the shop or the machine atleast. There is no way the...

Are they OEM cartridges?

Select for the ink setup that you have. If you are running CMYKLmLc then select that one. I dont remember all the choices it has. Just have to select the one for the ink setup you are running.

No it shouldnt waste the entire cartridge. But the machine needs to purge itself to work correctly.

Ok, take the bottom right black cover off that reveals the pumps. Restart the machine. Run a cleaning and look at the center shaft of the yellow head pump. See if its turning. If it isnt then that pump is bad. Im guessing it is ok. 84 is really hot and the machine may not like those temps.