Search results

1608 SE you sure about the 1608 being the same as a 1604?

Pick up you can adjust that pick up location, shoot me an email and I will see if I have the tech manual

Mimaki call this guy, he is local and and an experienced tech Dave Mee 617-308-9561

Roland Shot me your email and i will send the tech manual

SS21 inks I have several sets of 440 ml cartridges I need to move out. Mimaki brand SS21 inks, CMYK only. I am a Mimaki dealer and I need to move them as they have a Feb & March 2011 expiration dates. $85.00 each, buy 4 or more and I'll pay ground shipping in the lower 48 states. Call for...

Cleaning cart Break open or get a syringe and draw some fluid out of a cleaning cartridge. Gently push some fluid through the head by way of the nipple on the manifold until you see clear liquid comimg out in a line of spray

Print heads We stock them here in the States at $825.00. These heads do have the head rank sticker on them. we also offer free tech support www.solventinkjet.com

Pumps Check the pump

Pump Check the connection where the two lines from the pump meet the tubes that go to the waste bottle. That plastic part has a very small inside dimension that can clog.

Capping stations I stock those, give us a call at 800-328-1306 or order on line at www.solventinkjet.com

New heads vs old Look at the 540 x 720 and the 720 x 720 speeds. I had a XC540 and the 720 x 720 mode is what i would call a saleable print. The xc has 6 heads that are $985.00 per head vs the new printer with only one head. The Mutoh Valuejet and the Mimaki JV33 also use a single print head...

Tech manual I have it if you need it, send me your email

what is your email address?

Cap top Try this, fill the cap top with cleaning fluid and then do a clean. If the fluid is not getting pulled down you may have a clog in the line to the pump. If ink is pooling up in the cap it will cross contaminate. The SP300 caps have wire running down the center to prevent them from...

Pet film The printer is asking you to use PET film. This is film that will give you the highest resolution print so you can look at the ink dots with a loup or magnifing glass. Use some glossy vinyl if that is all you have.

Cleaning Foam tip swap and some cleaning solution I have them at www.solventinkjet.com

Cap tops If you can't find them from a local source. I have them at my site www.solventinkjet.com I can also supply you with a free tech manual.

MLD vs EDX I just came back from SGIA and triangle just intoduced a EDX ink. This new ink has very little oder and is a plug and play product that requires no flushing and no profiling (per Triangle) I spoke with one of the developers and they have had very good results in the test markets. I'm...

Hey now I believe that fellow has a black helicopter circling overhead

Kroy machine Anyone ever have one of these? It pressed dry toner on to adhesive back tape, it was the next big thing in 1980. Each font was a 12 inch wheel you had to buy for $45.00