Search results

Strange. So it can't be the adjustment. So I need to think ;) .

Is the complete job be printed, but just to short? Or is it cut off? There is a lenght adjustment that could help, and can lead to that issue if misadjusted. Need to check it when I'm at home, I'm travelling right now.

Enclosed please find a PDF from HP about that issue. Is strange that this problems happens with 10.2, but perhaps updating your driver could help. The PDF ist about 1 year old.

The message isn't a caldera message, it comes from the printer. You can switch it off in the printer settings. This printer is a contone printer, it should not treated as a "normal" printer. At minimum ink limiting and Linearization should be done in the printer, and if you don't want to do the...

Even if the position of the head is a problem the plotter starts scanning the barcode. But, because of the issue, he will not scan the whole barcode (begins on the edge of the cutting area and could miss a part). Good luck.

1. When doing regular contour cutting with OPOS, you are asked to place the knife tip above the first marker. It is different when using OPOS Barcode, in this case you need to place the knife tip below/in front of the barcode. It is shown on the cutter display. Have you pay attention to it? It...

Because of the SP300/SP300V does not check the ink type with the chips, it looks like that your printer have just a wrong setting. It doesn't matter what ink is really set to the printer, the printer can't recognize it. There is an "Ink Type"-Setting on your printer ... what does this show...

Typical issue with the power supply.

Have you changed the print head? Could be a problem with the contact plate in the printhead bay of the carriage.

Because of the heat the latex cures with a bowing effect could appear, a little bow distortion on the front of the print. The only plotter wo could compensate that is a summa with OPOS X (XY-compensation, S-Class since 2005 or summacut since 2007). Other plotters could have accuracy issues when...

To have maximum color consistence between different Printers, you should use a RIP with the ability for CMYK-Emulation. In this case, the printers won't be calibrated to their maximum colour gamut, but for a color space all printers can achieve, for example by emulating ISOCoated or such. GMG...

SAi publishes Service Packs with new drivers, new features and bugfixes often. Flexi 11 was published in 2012, up to 2015 when Flexi 12 was released there are 6 Service Packs available for Flexi 11, for free. There are updaters for Flexi 12 too until now. Only major upgrades are not free .. a...

Onyx is a RIP-Software only. Nobody I know uses it for vinyl cutting jobs. Flexi have a lot of interesting designing features for vinyl jobs. Which version of Flexi do you have tested? Since 10.5, the RIP-Engine should handle transparencies without problems (when loading files directly into...

The Latex 300-Series will be continued. The 500 is an additional range for a higher price.

The Printer does not base on the 25500, it bases on the 26500 (second Generation). And, in difference to these, it have a completely different stand, Roll-off and roll-up, power supply, user Interface, slightly different print modes.

It's only one generation. The Latex 500-Models are no complete new generation, but additional third generation machines.

We had good results with avery surface cleaner. We scratch the surface of the ink with a plastic squeeze (do not damage the belt) before. And, of course, cleaning the belt on a regular basis.

@ Kentucky Wraps: If you feel more secure with a technology of an older origin, you are free to use that technology. But for example, early adopter of an Epson Eco-Solvent in 2013 (proven technology from a technology leader) would have regretted quickly. And I know people who regrets to buy a...

Every of that technologies are under continued development. Why the eco-solvent inks have switched to a second generation in 2003, a third in 2006, a forth last year and so on? Do you know the improvements Roland have made with the Soljet Pro III (2006) because of known issues with the Pro II...

Advantages of Roland over HP: Bigger variety of models (small ones, print & cut, metallic and white) Depending of the model smaller dots, sharper edges Easier loading of pieces Advantages of HP over Roland: Easier Maintenance (user replaceable heads and maintenance units) Better quality...