Search results

+1 that is a nice layout

Thanks!

Latest request is to use the front on the attached book cover. Both the authors name and the book title Thanks for the assistance

For those needing a multilingual aide very well done, as usual

you want to get the biggest machine you have room for. We went with the VS 640 models even though 95% of all we do is on a 54" media the other 5% is a life saver. 54" rolls are MUCH easier to get, as for the cost that depends on the supplier. if you are getting the VS that is a printer/cutter...

not sure of a supplier that sells metal that is white, there are suppliers that have white vinyl sleeves that go over the post. you will have to paint or have it painted if they want metal only

we also had issues with the magnetic material from Magnum, have since switched to Car-Safe and have had no issues

Need some help identifying LED strips that are currently installed. These current strips have a frosted covering installed and are not bright enough to properly illuminate the panels. Having troubling finding a clear cover that will fit into this rail system. Can you splice into the wring...

That is cool! someone has plenty of time to tinker

While I agree with the points of canceling the order and bowing out of the deal, and firing her as a customer I do not agree with its the right thing to do. if she wanted the shirts to fit into a price range she should have shopped around. Moreover she gave her word and then to bow out after...

following this same thought do some block-out 2 side banner, and hanging it

paint or some opaque vinyl privacy film is an exterior application film. NOTE: if there is any lighting inside the tanning room it will cancel the privacy properties. whenever you see the interrogation rooms in TV / Movies there is a reason it is always dark in the viewing room.

we tried it on one of our original VS models, and hated it! burned through 2 cartridges, and only did 1 decal order all of the other was wasted during the cleaning cycles. it take FOREVER to print, and it MUST be laminated flushed the lines and reconfigured the machine to have Lm and Lc, now...

whatever you shop rate is, there is no way to know how long it will take for removal. The only way to price this is by the hour

The design called for mostly red but the saturation was set to minimal coverage, high speed

it shrank back from the cut line in the image, didn't measure how much used the exacto handle as a reference The imprint had a 1/8" "no bleed" from the print edge to the cut line to stop it from curling. printed Roland OEM Eco-Sol - speed ink coverage. This is non-laminated

+1 This right up Rick's line of expertise

Luckily this was not installed before the issue was noticed...... as it only took the vinyl 4 hrs to reach this state That is a handle to an Exacto knife for reference....... and yes there was a 1/8" no-bleed area Material is MPI 2120

it looks to uniform to be static, would start with a nozzle test then an alignment test

2 people does make it easier. HOWEVER the most important point no matter the size is to ensure that your table surface is PERFECTLY LEVEL....... cannot stress this enough