Search results

Dull and not consistant should not be a function of the effect choosen, but more of color management. In reality even banding is a function of the profile/media, but can be helped by changing the effect. Make sure you have done a PF Adjust (page feed). There is also a Micro adjust that can be...

Yes, I understand. The SAI folks are more likely to see it in the SAI threads than here. It can always be set in a "User" mode and then called from the RIP by using that mode. There are 30 modes available. It is Overwrite cnt and Overwrite Wait in the printer front control panel.

It was great to meet you Kevin. I was very impressed with the SignVox demo and the amount of power under the hood. I dont run a sign business, but this looked a valuable tool. Can you provide a link to more info about the car wrap version?

I will see what I can find.

If it is advancing at say, 16 pass. Then make sure you have 'color correction' checked on your RIP OR have the printer resolution set on the front panel to be the same as in your RIP. (RIP always overrides, except when not checked to do so)

It should. Post in the SAI Flexi forum. It may not until you set Strikes beyond 1 I find 2 Strikes approx 0.5 secs Wait You may have longer wait times depending on ink density and the capability of the media you are printing to.

Looks like clogged nozzles. Wayne is correct - head soaks.

5.1.13 Auto Cleaning menu Set the auto cleaning interval of this printer. Since perform the cleaning operation when turning ON the power, prevent from clogging the print head. Setup item Setting value Description Auto Cleaning Off The auto cleaning is not performed. 1...

You can call one of the local reps: http://www.mutoh.com/tennessee.php

There are plenty of cloth medias designed for eco that will print well to very well. But what you describe sounds more like an application for a banner material, like a smooth banner, or maybe a blockout.

Every ink brand and type -eco or mild, is going to be a different color. Some will be close enough, some not The feed and take up system is seprate from the printer, so there are no settings in maintenance mode...

Sorry, dont think I understand the question.

Yes, of course!

Is it not feeding? Or printing slow? Does the media advance at all while 'printing'? What 'mode' is the printer set for? Is "Color Correction" in the RIP checked?

You are welcome! Sometimes it is tough to get on the same page long distance. Hopefully, it is just the fuse.

These kind of fuses wont look blown, you have to measure continuity. Yes, I think your fuses are all soldered on. It takes a little skill and the proper soldering iron to change without causing damage to the MB.

No, the counter is just that, a count of nozzle firings stored in a data base, then that hits the magic number, it just gives a warning. It is all based on MTBF analysis. F2 fuse is probably #1 reason. Could be the head died, cable died or is shorting head driver board mother board...

Mutoh dealers have a recommended grease, you will want a not hardening type, put on very thin. ftp://ftp.mutoh.com/Printer%20Information_Manuals/VJ-1204/Maintenance%20Information/Technical%20Information%20Bulletins/MAI%20Bulleting_021709%20Bearing%20Raceways.pdf You can use a light machine...

Try printing at a slower speed. i.e. next step up resolution or mode wise. Might also try a different wave form.

Environmental conditions?