Search results

Also, it only makes the noise going forward.

No, we don't use the plastic flanges. The thumping sounds like it under the drive wheel. I tried removing the bottom panel but it appears I'd need to remove the side covers also.

Sounds like it's coming from inside under where the vinyl rolls over; maybe something to do with the drive wheels?

No lights. I checked continuity of the switch and it is fine. Should I buy a new board or might it be the transformer?

Lol, yeah, we bought it used and it has been problematic since we got it. I will see how much it is to repair the connector but only to resell it. Otherwise it's headed to the landfill. We've certainly got our money out of it - looking at buying a new - Summa.

Our tech guy says there is an energy error and the USB connector, part of the motherboard, is damaged. Our FlexiSign won't recognize the port. Anyone have a used GX-300 motherboard - or a work around? Computer doesn't have a serial port and cutter doesn't have or ethernet port.

I'm wondering what digital print vinyl/lam (we'll use matte) people like to use for wall graphics. The client's wall (330" x 95") will be painted and ready for application. It does not need to be removable. We have a Roland VG2 540. Also, any advice on the wall paint, ie. latex, gloss, semi...

Many restarts, updates, even upgraded to FlexiCloud as we've been putting it off. Roland page says it's an issue and to revert to Windows X.. but I don't have a spare computer to do that. I am using an older Mac which we're getting work done at least.

I was using Flexisign (12) and the PC screen shimmered. The next thing I knew it would not connect to the Roland GX-300 (USB and serial) cutter. Works on an older version of Mac I still have (thank goodness) but I tried downloading the GX-300 x86 driver and even had an IT guy take a stab at it...

Temp of print and dry heaters while printing? Our material suggests 45-50C

What is your new, better, product if I might ask?

Just tried it on EasyWeed and that seems to be working on 70 pressure. Does this stuff, Roland HeatSoft PLUS, have a shelf life? What would be the difference as the settings stayed the same but the cut/weed is quite different.

100 Pressure cuts through the material so obviously that's too much. It seems any pressure the vinyl will all come up.

Just did a cut on my plotter and it weeded fine at (0 pressure but when I do same testa nd pressure on my VG-2 it doesn't work, all vinyl pulls up, and at 100 pressure.

I will search forum but looking for any easy buttons. Printing on what we think is a good Roland HeatSoft Plus HTV. I have cut set to what is explained as the correct setting but when I weed it it takes the letters with it. These are small and bigger logo type going on our own businesses t-shirts.

Sound lemony to me. We had some start-up issues with ours. Something about the dampers not filling properly. Went through an entire set of inks cleaning and leaking... Cutting - I did have some paper, or backing, that had got ground into, under, one of the feeder wheels on the lower roller...

I have a GBC WF cold laminator. When I push the forward button the safety signal beeps. I won't start to turn until I turn the speed up to alight max. Sometimes it doesn't turn at all. I usually use the foot controller and it does the same thing with that. I can replace the speed knob rheostat...

Thank you - whew!

Using Arlon optically clear laminate on an Oracal (Oraguard) perf 50/50 vinyl. Looks great straight on but looking from the side there is a distracting pattern where I installed using either a felt side or flat side of a queegie - both do it. You have to apply a fair amount of pressure to keep...

Thank you. I was thinking I would be doing sections at a time.