Search results

I cut AU all the time with a router. Yes it will build up on the cutter. That is why real machinists use a cutting fluid such as tap magic for AU to help out with the task. The idea is to keep the chips moving away from the cutter bit.

PVC Gorilla glue some good stuff. PVC gorilla glue is PVC resin melted in Cyclic Amine solvents. Weld On is acrylic resin melted in a solvent depending on how thick it is. Some is like water while others levels is like syrup. Methylene Chloride Methyl Acetate Methyl Ethyl Ketone...

YA! We not getting paid to build water tanks.

about half the time the motherboard on many new computers will have a serial and or a parallel port head on the board. All you have to do is get the plugs for it. About 5 bux on ebay. About half the time the manual will not show the ports but they will be on the motherboard all the same. I...

On one hand adobe reported success with their CC model. On the other hand Adobe reported a "diluted" earnings report. Operational costs have been reduced. Lifetime members has grown to over 1 million, However, this is the easy pickings because the CC for this group makes financial sense...

HE won't have any one calling him so he cannot pass blame to any one..

vid tuts are great. I pray you make one because the more tuts the better.

A thread full of vulgar language?? wow C'mere little boys so i wash your mouths with some soap. Better yet, how about if someone used a little lye. That should get them clean.

Name one that has ever given a refund.. AT least one that did not fight the refund until the bitter and was ordered by a court.

those cnc laser machines are used in the garment industry. They cut 50 or more layers of cloth at one time at high speed.

Name one..

here is another mdf with metal coating. Sculpt nuveau

will it do a test cut from its own commands? IF not its got a mobo problem Also it sound like the proximity sensor that finds the placement of the pinch rollers is either not working or is out of alignment. Or the mobo is dead.

Get some MDF.. route it an dseal it with shellac. Get some bronze Sculpt Nevau and coat it. Looks exactly like the real thing., spend about 30 bux,, make about $300 http://www.sculptnouveau.com/Details.cfm?ProdID=42

there is no need to spend 2 grand there are dozens of lightly used name brand cutters around. I see them regularly for 300 - 500. I have never observed one that was beat up. I would wager there is one in one of this sites users that would let one go for a great price.. Later if need be...

because anyone who ever read this board will know that ,,, its a chinese made pile of wasted metal and plastic. You will have more aggravation trying to cut a decent file than it is worth. The pains of frustration will last far longer than the thrill of a bargain You can get a great used...

+1 used name brand is better than a new junk brand.

take receipts of the repair to the court and they likely will reduce it to a mechanical failure ticket. Much cheaper.

When it comes to sign supplies that is pure bullscat. 100% pure. I've been to both sides of the country and supplies cost the same within a few points every where. As for building a house the costs are higher in the north because of the Gubmit regulations and the housing designs. Houses in...

the problem is. No one knows about art cut. Like many other low cost packages it is not well known. Therefor very few know what you are asking let alone help. Maybe a little more info would be helpful. Such as what formats will it export. And what are you trying to accomplish.