Search results

This stuff works pretty good (if you can't find the right materials): http://www.homedepot.com/p/15-mm-x-4-ft-x-8-ft-Black-Phenolic-Plywood-5-8-in-Category-415667/202083089 You need to seal the edges if you want it to last in the rain. The smooth side will take a vinyl or you can wrap it with...

We have a request to source these for one of our customers. Anyone have a preferred supplier? I have a Stouse account but it does not look like they do them. Found lots of results in a search but no way for me to know who the good guys are. Thanks wayne k guam usa

You should be able to fix it up in either Illy or Corel. I'd try Illustrator first see what it is in there that is giving Flexi fits. Depending on what is in the eps the easiest way to make it manageable might be to turn it into a bitmap at the size you need either in AI or Photoshop...

+1 You can look up the trim online and they look like they are just glued on

Another way to go is to place the top edge exactly where it needs to be and tape the entire top edge from front to back with 2"masking tape so it can't move. Leave the bottom free so you can lift it up to get to the liner. Start at one end and roll the backer down away from the top edge at...

I thought it was the international symbol of peace but I could be wrong. wayne k guam usa (whatever you do, don't look up the definition for corn dog in the online urban dictionary)

This one is a little pricey at $150.00 but the style points are off the charts wayne k guam usa

Hi, your link is not working. Have not heard of your issue before - would like to see the problem. wayne k guam usa

You have not given enough info for anyone here to ballpark a price for your project. You should meet up with your friend with one of the vans and go over what areas of the van he thinks the graphics should cover. Take notes and measure out these spaces. Measure out the wheel base or some other...

Only so many hours in the day..... In a production environment you want to be cutting and printing, not cutting or printing. wayne k guam usa

Needs more downward dog.... Looks ok wayne k guam usa

The 1204 service guide has the wiring diagram, if you need a copy shoot me an email and I'll send it to you. wayne k guam usa

Not sure, but if you are asking if the "4 Mark type 1 or 2" can be rotated then yes. I think the 3 and 2 mark sets can't be rotated. wayne k guam usa

Check the type of crop marks you are using, if you use the segmented type with the "T" shaped intermediate mark you can't rotate your layout to cut. You might be using segmented without out knowing it, if the step size is too large CM won't add the center marks but still label them that way and...

Post your question here. Lots of ways to do things in Draw and lots of people here that are willing to help out. As for Illustrator vs CorelDraw - it's good to know both if you have the time. wayne k guam usa

Not a lot of info in your post but it sounds like you just need to rotate your image 90 degrees. Your panel height is 98 and the length is divided into the number of panels you want to set(or by what your max print width is for your printer). wayne k guam usa

Just make sure you have proper backup before taking on an out of state dojo. wayne k guam usa

Looks familiar, like it has been posted here before... wayne k guam usa

Looks good, did you use the loose studded lettering in an unpadded shipping box distress method? How long did this take you? wayne k guam usa

Looking at your photos if you have a sizeable quantity to get done I'd invest the time to get a good fitting template that will leave a small gap (1/16" or so) or so around all the cutouts and contour so you'll have a little leeway with the install. Cutting that many openings on each by hand...