Search results

Yes, we're seeing it mostly in the blues, but it is slightly noticeable in the other colors as well. This is one of a slew of issues the Jv3 has been giving us recently and I'm about ready to sell it and get something else. I'm going with your 360 suggestion, and if the salesman is happy with...

Raster doesn't allow grouping of tiled jobs. Hence my problem. I wanted to make sure I was doing it correctly, or there wasn't a work around.

yes this is a Jv3. I'll try using a different setting to see if I can eliminate the issue that way as well. you've never tried to find out why this is happening?

I did that, as well as had a technician in to do some maintenance but it comtinues to do it. And, it seems to only happen in Onyx. I printed from Raster with no problems

At first I assumed this was a printer issue, but have come to realize it's only occurring through Onyx. Any suggestions as to why this has become a problem all of a sudden? Any suggestions as to what I can do to eliminate the problem? Until I can correct this issue, I am using my backup rip...

So we've narrowed the issue down to this "starvation" only happening when I use the Onyx rip program. When I print 100% of any color in Onyx, I get this horizontal banding which is almost consistently the same amount of space. When I print 100% of any color in Raster (my alternative choice...

all the colors are functioning. I did as you suggested previously, and printed solid C / M / Y / K and the issue isn't color specific.

Mike, I think what you wrote may be the issue. I again had it happen. It seems to occur after about 2-3 ft of print. I get solid print, then it starts to drop out, then nothing. I noticed it is now "printing" but not lay down ink then returning to the capping station and on the pass...

Well, after coming back from lunch (complete shut down of computer and printer again), I figured I'd try to simulate the issue and see where / when / if / how while it's doing it... and I get a normal print. Go figure. I still would like to nip this in the proverbial butt... this Jv3 has been...

Thanks guys! Actually I did a test draw before (always do before printing) as well as immediately after I started having issues and that were the same. I run 16pass but when this "drop out" occurs, it looks like it's running in 4pass. As far as the other possible issues, I'm going to run...

First I want to apologize for the camera phone photos, as I don't have my digital available. I'm not sure where to start. I assume this is a communication issue, but not positive. Please, any help would be appreciated at this point. Attached are some photo examples of what is occurring...

The error message that comes up in Raster is: Mimaki Jv3: DRV: An error has occurred during output(O). <Bus reset occurred {-536412148} > - [Terminate] - (0x02018003) Only recently I have been experiencing issues while printing on my Mimaki Jv3. I primarily use Onyx for RIP but also have the...