Search results

first off if you have never drilled thru stainless...IT SUCKS! BUT if I had to i would make a aluminum frame and mount panels on both sides. I would drill a bolt thru the aluminum and then the stainless and attach with lock nuts at top and on side just drill large self drilling screws into...

damn adobe you could at least offer a better antivirus! These updates are killing me with all their "junk" they auto load on your machines, Im with Sightline I always do custom IF I am downloading anything. I dont update flash, reader anything adobe, if its running fine why mess with it...

Ill try that fellas thank you...I miss my old plotter thats all i know

lol touche!

signwarehouse tech support said: If the material ends where it started, then the cutter is tracking correctly. If the tracking was off, it would not end in the same place it started. while I can agree with that i do NOT think it would happen on every roll of vinyl

i ALWAYS show me first I never just cut and it will take about 5-7 times of trying to show me before i cut it and it makes it. as far as the "tractor holes" dear God I wish they woudl do away with those and quit kissing Gerbers a**! lol I keep my grits clean no doubt my machines are immaculate...

media is square, using oracal 651 and 751 i cut medium not fast aint no sense in wide open. blade pressure is good enough to cut i dont run blade down as hard as I can. its defintiely pulling to left of the machine i guess i need to see how to control the friction wheels on it

started out as letting it pull off the roll but then when it got back started to unroll it, its getting worse

what they dont tell you is how many hours, how many artists were working on this and for how long? we all know ad agencies make their money doing these things. what else they dont tell you is how many ways they offered to implimate the design on several areas of media, brochures, commercial and...

My first plotter was a VE GRC-61. that thing would track 30' I am not lying. (Damn I miss that machine) Since i had to get a new one I got the VE Q30 which is a graphtec, this damn thing wont track over 8-10' without getting all wompous and what not The machine is level, the media rollers are...

Ill agree! Some of the best money I ever made was subbing out to a local larger sign company to get lots of large signs done. Back 5-6 years ago it was freaking awesome. Now that company is gone due to the economy but I still enjoy signs365, vinyl graphix and other companies I use. I have no...

post pics of the layout Im confused!

Of course I see they chose some "off the wall" font as opposed to helv or arial....of course they did they are architects and everything has to be difficult

I would do NOTHING and make them do it OR charge them enormous amounts to redo it. The smaple oyu are showing looks to be mnothing more than a radiused rectangle with type and circle I could recreate that less than 5 minutes, do the other signs look like this? if they do you will have no...

I would not clear over bad clear until it was completely removed

OR remove all and buff the face back out, sometimes you can buff enough to save the face

Krystals logo is now done this way and it looks great at night and in the daytime. I dont see a problem with it. I would start out with a white face though and then cover all according colors with black and the logo

get to sanding! I would go with lots of water and 1000 grit finish up with 1500grit and then buff it out. Should not bea problem just a little work

I always use a house brush to brush on the first coat and sorta get the edges of the vinyl sealed down and them go with roller. you will never get crisp libnes when you used masking but usually its doable from a short distance

ok I pulled this up http://www.signwizard.co.uk/used-vinyl-cutters and going thru their used stuff some of these plotters look like rolands soooo im thinking once again this machine you have is a GBC brand (great business computer) mine was a GRC 61...