Search results

I assume your putting the start just under the black box before you start it. It should find it and start to look for the sever for the related cut files after the starts the scan. Are you using some kind of special material?

Scan Mode 1 on my cutter. What happens when you try to read a barcode? Are you using a roll barcode or sheet barcode?

You shouldn't have any problems with version 22. Something is off. I'm running v19 and it's working for me.

I've got a customer looking for stickers holographic material. I can't print white so I'm limited in what I can do with that material. Looking for someone that can handle 1K - 10K run of die cut stickers on this material that I can get wholesale. Thanks

It for their business, so I'd prefer something appropriate for that, otherwise I'd just print it on calendared and cut it. I check out signs though! Thanks!

I've never done a decal. I've got a 2 color piece, white and green, and about 14" x 14" in size. Customer wants it to go on the back window of their car. Is this something I should print or would it be easier to have it done in colored vinyl? I've never done just straight cut vinyl without...

How small are you going? You're bound to get some slight variation, just the smaller the border the easier it is to see the variation in it. On small stuff I do 1.5" I don't do less than a 1/16" border, on larger stuff I try and get customers to go with 1/8" if possible but still no less than...

Thanks! I'll have to check on it but I think 50/50 will should be ok. I see commercial vans with it on them quite often, but I'll dig in to look for specifics on this law. I found this is in the window tint law, I'm assuming it goes for any kind of application on a rear window, including perf...

I had a customer ask about doing a graphic for their back window. I know I have to used window perf for this or else their rear view mirror will be useless and probably get them a ticket. I've never printed, or installed any window perf or anything on glass before. What is the recommended...

I deal with this so much as most of my business is with individuals or people that don't understand printing IS NOT magic. I get screenshots all the time, if I can scale it to a useable resolution for the piece, I'll use it instead of trying to explain vector artwork because 9 times out of 10...

I deal with this so often with people. Send me images they have made for a label or sticker without knowing the size of the piece they want before they have their artwork done and then it has to be scaled different or cropped. Just like lots of people think printing is magic and you can just...

No. They're always like that and never had any problems. I did try moving a pinch roller slightly out, about 1/8", and I tried to cut that column again and it cut the full circle. I didn't get any messages like it was Off-Scale or anything like that. Just seems odd and if there is a way to...

I was cutting a few sheets today and it's not using the barcode to read the sheet I set it over the start positon then send the cut data via onyx cut server. However I noticed on every sheet the far column would only do a half cut on every sticker in that column. I don't know why, the cut files...

What are you laminating this with? Thickness? And are you just doing kiss cuts or are you cutting through material and backer on these?

Welcome! Lots of great people and info here. I started with an Epson S40600 a couple of years ago and I absolutely love it! I've had zero issues since my install, machines are rock solid.

Seems like it's the same as Britelines holo material. Both are 6mil in 30" rolls. I'd try the yellow filter over your sensor, that seems to help. I think I had my sensor set to around 30 for reading that material on my Summa.

I just sold my SP-540V on Craigslist in 1 day. Just disregard any offfers that seem too good to be true. Take cash or bank check only on pick up. Good luck!

From the Work folder. I didn't restart initially, that's probably why I was getting the ~1 even though nothing was showing in the queue or in the Work folder. Just not sure what caused it, I set this small file approx 3" x 3" to 120 copies and it took about 3mins for it to populate the sheet in...

Working again. Even though I cleared them from the Work folder, when I imported the file, it acted like there was a copy in there already and added ~1 to the name. It's acting very strange, taking a lot of time to update when I change the copies on the file. It may have been the last windows...

Loaded up a few files I've printed before. I changed one to 120 copies, it's a 3" x 3" sticker, and it just got stuck on processing. I've restarted, cleared all the jobs from the work folder and it's still freezing. The console is stuck on Server Starting... I'm dead in the water any help would...