Search results

How easy is it to learn? I thought about doing the trial to see if I like it.

I've never had an "old way" I'm still pretty green in vinyl printing. Everything I've learned in this area is either by video or reading. I know many have their own ways of doing things so it's nice to get an idea so I can try them and figure out what works best for my setup.

Yeah I'm just talking like 1 or 2 sheets though not a roll. I totally understand what your saying though for roll-to-roll.

Yeah I'm probably over-thinking it a bit. I did have this idea the other day though. I'm gonna try this way out.

Yeah that's what I followed. How do you handle the sheets after they have been laminated to the rewind roll? That is what I'm curious about for those with this type of machine. I'm coming from my RS 1400, which is so easy to do sheets on because there is no reminder in the back and a channel to...

So I finally received my GFP 363TH and seems pretty easy to setup. Just a learning curve on a new machine. I'm so used to doing everything as sheets, but I will have to transfer to roll to roll eventually when I feel comfortable with the process of doing roll-to-roll. How do you laminate sheets...

Ah ok I figured as much. I haven't looked into it. I use Thrive version of Onyx currently. I do print and cut. There are sheet cut functions I can't seem to get to work on v19. When I tried v21 it worked but I did run into it not reading a barcode a couple of times. Just wondering which option...

Since getting my Graphtec FC9000 I've found that my version of Onyx (19) doesn't support full functionality of the cutter for what I want to do. I tried Onyx version 21 but it still wasn't great. I haven't tried Flexi and doing things through illustrator and cut master seems very tedious from...

I'm a big fan of tactical pants. Can never have enough pockets.

That's what I'm thinking. I'll have to experiment a little. Nope. Only has 2 point at each corner when I looked in Illustrator.

I've got some stickers I'm doing kiss cuts of and the design is tapered because of the tube they are going on. For some reason whenever I cut them it runs about half the speed it's set to. It's something I've never encountered before so I'm scratching my head. I can only think that it's because...

What holographic material are you using? I've had some success with running it. I found that I have to keep sheet sizes small, the more reg marks the harder time it has. I've always had to use the yellow filter to get it to work and lowering the sensor sensitivity. That being said, I haven't...

I need to find a new one. Last tax season I left a note with two questions on it about expenses, never got an answer. Just recently I emailed them asking for guidance on buying a vehicle and the same thing, no response. These were not hard questions so I'm a little baffled why they couldn't just...

This is immediately what I thought when I saw this thread. Pantone is trying to get people into some sort of subscription service. Seems like a bad move IMO. What did Klaus Schwab say, in the future you will own nothing and be happy about it.

You need to calibrate you OPOS sensor to it and also a filter over the sensor helps. I've gotten it to work pretty good it can be picky reading the marks at times though.

So I started by just uninstalling Onyx 21.1. I noticed it had installed it to my removable drive, guess it defaulted there because of Onyx 19. Reinstalled to the C drive and performed the Graphtec update for 21.1. Did a test print and tried the roll and it worked this time after a few tries. It...

Guess this is just me in here now trying to answer my own questions. :p So I've tried Thrive 21.1 with the update and the roll barcode will not work at all. I talked with Onyx and they checked my settings and said if they had another update for the FC9000 they'd let me know. Well that's not...

Should be fine. I do a lot of "die cut" stickers on my D140 with the drag knife.

Also looking to know if there is a way to have the Cut Off function to happen after it finishes cutting one job? Might be a setting I have to turn off. I did a test of a couple roll barcode pieces, it read and cut the first job, then did the second barcode and cut, then it went back to to the...

I can get Roll bar codes to work but sheet barcodes don't seem to work correctly. it might be something I'm missing. It scans the barcode, say's it's retrieving data link information, processing, then it drops just below the start mark and starts looking to scan the registration mark. It can't...