Search results

Tell them to send you an invoice of the order you placed with them at that time.

You can allways raise the heads.....We have ours on high thats the end of our head strikes, and the output is still awsome

Make sure your connectors are pluged in that they didnt loosen up or someone disconnected them by acceident

Here in Chicago alot of people know excatly what wraps are.

Wildside......To tighten up the tension that white knob on the take up roller twist it towards the back of the machine, unless you need to loosen turn backwards. Otherwise you might need a new motor

Randy101.....I hope you dont have the JV3-250 I dont think your arms would be long enough.....LOL

Randy101.....I hope you dont have the JV3-250 I dont think your arms would be long enough.....LOL :signs101:

Is there any vinyl stuck to the blade or maybe you need a new blade holder

Zund's machine is an animal you get what you pay for hope it works out for you, if you do decide to toss it out the window let me know, I'll be there to catch it lol

Check to make sure your ink is connected, if after doing a few hard washes and still nothing, you might need a new head

Randy101.........what are your temp. settings? For 13oz. glossy banner we use Ultraflex heat settings @ 45-40. You should allways keep the material as tight as possible in the back, dont let it sag as it might start going in cock eyed.

Your best bet would be to get a loan or a line of credit from your bank, It is much cheaper then a lease, and there is allways extra $$$ in your account in case of an emergency. I myself would never buy a cutter or printer off of e-bay. If your looking to buy use buy a demo machine from a...

Id advise you to take a wrap class and get the basic know-hows or contract the work out and still make a profit. good luck

Isign.....We had the same thing happen on our Mimaki, did a couple of light cleans and it was fine. Then it did it again, was told by my tech we needed new dampers changed them problem was gone. How old is your machine.

More then likely they were screen printed onto clear

Myronb.........What rip software are you using. We use Onyx and can monitor the ink levels as they are being used. We never had any troubles with our Mimaki JV3 160sp inks before. Check to see in your rip software if there is a monitoring device. Good luck

This question is for any avid illustrator user: This question really has nothing to do with your post, but seeing it looks like your an avid Illustrator user, is there something in Illustrator CS you can make one copy then do a step and repeat like as in Flexi pro? Any help would be...

We have an S-750 built in 1989 and still going strong. Just keep it clean and lubed and it will run forever. Nothing LAST forever!!!

Here are 2 fonts that match the font: Belwe Lt Bt, & Bengel Condensed

Why would you need suction cups, level and a ruler on a squeege? I dont get it