Search results

4 rollers. I can't add anymore they said to the SummaCut version. It was fine when I put the blade in. I kiss cut about 7k labels and did a bunch of flex cuts on the label sheets. I just have a feeling I should've gotten the S2 T version. Over the last 7 days I've cut 30k labels and stickers. I...

New blades installed. Reset my depth and pressures. Cutting through a 3.4mil with a 3mil laminate worked great for about 2 days and now back to the same place I was before. The cuts get lighter and the left side of the sheet is not cut as deep as the right. So my guess is that if I do flex...

One reason I think is because they say the cut strip is damaged and I probably broke or dulled all my blades. Only one looks broken though. Getting new blades today, also I just think the way I'm used to setting up my sp540v is a little different than this machine. I've seen several different...

Yes it shows the all the cuts. I'm not sure if I tried turning any off in that case to see if it still only cut half. I'll have to try that a couple of those things. It just seems odd that one way of cutting it doesn't work.

Well with the blade pictured I was cutting Kiss cutting and flex cutting 3.4mil vinyl and of course through the backer. (I don't have a micrometer so I'm not sure of the thickness of the backer.) Most of what I cut is the 3.4mil with a 3mil vinyl. My Flex settings were 275/135grams (Full/Flex...

According to Summa I've ruined 4 blades and my cutting strip in a matter of 2 months. They say my blade is extended too much and my pressures are too high. Any discoloration of the cutting strip means it need to be replaced. So if you do one Flex Cut run and it scuffs up the strip it's bad...

It doesn't do it when I run barcode server for it or when I use WinPlot. It's only when I have Onyx initiate the cutting process. It's highly unlikely it's the cutter that's causing it. It's something with Onyx.

I did a one time. I had started cutting a job and by the end of the sheet it was barely cutting at all and noticed the blade holder was not sitting deep enough. Don't think I had it tight enough and it pushed the holder up during cutting. I make sure the holder is all the way seated when I...

They are going to open a ticket with Summa as of today to see if it can be resolved. They aren't sure why I'm having this problem with a new machine. Guess I'll just wait and see what they say. I mean I never got hands-on training because of the virus stuff so maybe I'm missing something...

"Thank you for providing the information. Our goal at Summa America is to have all our dealers be proficient in our products. All our dealers have participated in our training sessions and have Summa Certified technicians." That's what I got back from them. Even a rep from my dealer said that...

The machine is 2 months old. If that's the case I've got a lemon Summa cutter then.

I don't feel any grooves. I see where the blade has touched it. Just looks like it's scuffed the surface but I don't feel any kind of grooves in it if I run my fingernails across it.

Not sure what a planar cable is. You mean the network cable?

What does a bad strip look like? I don't even know what to look for. It looks fine to me, but I don't know what a bad one looks like.

It's brand new, about 2 months old. Summa cannot help me. I've emailed their tech support and they just tell me to contact the place I purchased it from. Yes it's tight. I did have it lose one time but I make sure to tighten it up good. I'm waiting on new blades but I shouldn't have 3 dull...

Right now my 36deg blade is set to .43 for the offset.

My machine is only about 2 months old. I shouldn't need a new strip yet I would think. The machine came with two blades and neither of them are really good anymore. I ordered a pack of blades from Airmark to try as well.

All they do is direct me to the company that sold it to me. I've been trying to work with them but haven't gotten anywhere yet.

So I've been messing around with this today and I switched blades and reset my depth and pressure. Run the Pressure Test until it peels easy and leaving a slight mark on the backer. Test the flex cut settings and the test pops out nicely. Then I run an actual job and I find the excess vinyl...

I'm trying to narrow down my cutting issues and doing different tests. I sent a cut file from Onyx Cut Server to my Summa D140 and it started the cuts but only did half of the job. I normally use the barcode server and just load up all my jobs and that works fine. Not sure why it would just cut...