Search results

I didn't =( I ordered Clean Cut Blades. I guess I have to order a 5 pack of blades if I want the 35 degree. Also one thing I just tried. I sent a test cut file through Onyx Cut Server and it only cut half of the test file and just stopped....maybe this could have something to do with my cutting...

I just ordered some new blades to see if that's my issue. Guess I'll find out when I get them. Just have tons of work to get through and this is really putting a damper on things. Right now I'm cutting 3.4mil vinyl and 3mil overlam. Most I do FlexCuts through. My pressure for contour cuts is...

Just by a visual I noticed the blade I bought looks slightly different than what came with the machine. Not sure the manufacturer of the blade I bought but I got it from Grimco. I did look through a magnifying glass and didn't look like the tip was broken. Also have a 60 degree blade and that...

M I set it initially by taking whatever I'm cutting, and dragging the blade, by hand across the material with medium pressure to see if it cuts through or just barely. I stop when it's just starting to cut through the material. I don't really use cast vinyl so I can't say anything for that. I...

Either I'm missing something huge or this cutter is a POS. Cut fine the other day, came in yesterday and went to cut a job, I tested to make sure my pressure and depth was still good. Cut the job and weeding the excess didn't come up smooth and had to hold the cut pieces down and pull away the...

Right I understand that. I can't get it to print that well on my Roland through Onyx and wanted the colors to match. I had already started printing another part of the the job on my Epson and wanted to keep the colors the same. I cannot figure out what some of the cut settings mean in Onyx for...

Ok I'm in a pinch here. I've got a ton of work and want to utilize my sp-540 for cutting. However I'm printing on my Epson s40600. I cannot figure out how to do cutting the way I did it in Versaworks through Onyx. So my problem is I need a way to get the Roland register marks in Illustrator so...

Same marks. I just used some transfer tape and redrew them in worked like a charm.

Good idea since I'm setting these up in Illustrator anyways. Thanks!

It's already in a pretty dimly lit corner. I managed to get one sheet to read but another wouldn't. Guess I gotta run the gauntlet in trying everything I can. Thanks

Sorry for all the threads. I don't have anywhere else to ask for real-world knowledge. I'm printing on RTape metallic vinyl and have OPOS marks for cutting. I did the media calibration since this is very difficult to read. I was able to cut one sheet a couple of days ago, but I'm trying and it...

I guess I'll start to have to check the squareness of my sheet edge if I'm concerned for high accuracy.

What settings are you using for you OPOS?

Epson S40600

I've had my cutter running for about a month now. I've had some difficulties but worked through most issues. I'm just wondering about accuracy of cuts and what I can expect. I cutting this piece, which has a very thin border (1mm) and as you can see the cutting is off by about .5mm. I've done...

:u rock::u rock:

Found some fonts that were close. Just not the exact match. Thanks

.

This not having profiles causes me a problem because I do print on RTape MetalFX often and with that material you don't want a ton of ink being laid down because it could cause it to curl. Does anyone with an Epson solvent have a profile for Rtape or how I could go about getting something setup...

I bought my first machine used about 2yrs ago, SP-540V, it's been a great machine, maintenance you want to be ready and comfortable with doing stuff yourself. That being said I've done all the maintenance and repairs on my machine without any prior knowledge and It still is printing really...