Search results

I don't see any yellows or magenta dots in the test print on my end, I am not say they are not there but I can't see them. The fuzziness of the grey is probably because the print head is no longer calibrated since it was removed from the printer.

I don't see any specs in the print.

Can you post a picture?

The print head is designed so that one nipple goes to one channel on the bottom of the print head. If you are pushing through one nipple on the top and you are getting it out of two or more channels on the bottom then the print head is probably damaged beyond repair. You only want to push...

It doesn't take much of an angle on the print head to cause an issue with the capping station seal. It might be worth the time to remove the print head and make sure that it is definitely laying in there level. I have seen service techs make this mistake so it can happen to anyone. The best...

When you had the printer doing cleanings was any ink going into the waste tank? Also you said that you pushed cleaner through the head, did you take the print head out of the machine? If so did you put the head back in level? It sounds to me like you either don't have a seal between your...

Thank you for the reply. Should I send the request to you directly or to someone else?

I have attached a screen capture of this post and the one from yesterday, you can see the edit button is missing.

Now this is really odd. This new post allows me to edit it but the one from yesterday doesn't have the edit button at the bottom. Could this be because someone liked the post from yesterday?

I had a typo in one of my posts from yesterday and wanted to fix it. I used to be able to edit the posts but now I don't see anyway of doing this. Am I missing something or is this feature removed?

You are correct. I guess that is what happens when you type too fast and don't read it before you post. Thank you for the heads up.

I agree, not all third party inks are bad. We have been selling our house brand of inks now for over three years. We have one customer that uses over 750 220ml cartridges a year and has been doing so since we started selling them *without *issues. Occasionally you will get a chip error but it...

We can get you parts for that unit. Give us a call at (973) 808-8600 Ext. 2

Have you tried to clear preferences in Flexi? If not I would give that a try. It will delete any output drivers you have in production manager as well as any jobs but it won't delete any profiles that you might have loaded.

I have never worked with the HP Latex but can't you just tell Production Manager that you have a 24.5" roll? In my experience the rip isn't what tells the printer where to start printing it is the printer itself.

We have sold over 350 of the ValueJet and while I am not saying that one or two haven't had an issue this doesn't appear to be a printer issue. Once you get this all straightened out you will see they are great units. Normally I run adhesive vinyl with the pre-heater at 45, platen at 40, and...

What are your heat settings at? The higher the heat the softer the material will become. Also do all the rollers do this or just some of them?

We are here in booth 107.

Final Day of the Sale. Act now while the price is low.

Evening Bump